Engine LathesSTANKO 1M635
Texas, United StatesOverview
Brand
Model
ID #
577754
Type
Condition
Used - Good
Serial #
3726
Location
Texas
United States
United States
Stock #
L3000339
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
Convert Specs to Metric
Swing | 27" |
Swing Over Cross Slide | 14.1" |
Centers | 118" |
Spindle Bore | 3.125" |
RPM | 1,250 RPM |
Power | 20 hp |
Dimensions | R-L 226" X F-B 72" X Height 62" |
Weight | 12,584 Lbs. |
Spec Sheet
Swing Over Bed Ways.................................27.56"
Swing Over Cross Slide..............................14.1"
Cross Slide Travel..................................15.75"
Swing In Gap........................................35.43" X 17.72" Long
Compound Travel.....................................8.6"
Compound Swivel.....................................+/- 90 Degrees
Center Distance.....................................118"
Weight Between Center...............................7,700 Lbs.
Spindle Hole........................................3-1/8"
Spindle Speeds......................................10 To 1,250 Rpm's
Spindle Nose........................................A1-11
New Gator...........................................16"3-Jaw Chuck With 2 Piece Jaws
New Gator...........................................20" 4-Jaw Chuck With 2 Piece Jaws
Feeds Compound......................................0007 To .017
Feeds Cross Slide...................................0.001 To .20
Feeds Carriage......................................0.0024 To .05
Threads Inch........................................1/4 To 28 TPI
Threads Metric......................................1 To 224 MM
Tail Stock Quill Diameter...........................3-1/2"
Tail Stock Quill Travel.............................9.4"
Tail Stock Taper....................................#6 Morse
Maine Motor.........................................20.4 Hp.
Floor Space.........................................R-L 226" X F-B 72"
Machine Height......................................62"
Weight..............................................12,584 Lbs.
Coolant Pan.........................................Yes
Taper Attachment....................................Yes
Thread Dial.........................................Yes
Rapid Traverse (6 Way)..............................Yes
Power Feeding Compound..............................Yes
Steady Rest.........................................Yes
Note:
Machine has been cleaned, Painted and cycled.
Headstock and apron will be cleaned and flush and new oil.
Cross slide, compound and taper attachment will cleaned and
checked.
Prices subject to change without notice.
Optional:
Newall 2 Axis D.R.O. System Installed............$6,850.00
See more listings of this Model
STANKO 1M635
Engine Lathes
STANKO 1M635
Engine Lathes
See more listings of this Type
SHARP W1840
Engine Lathes
GIUSEPPE GIANA 3280 GAP BED ENGINE LATHE
Engine Lathes
WAGNER BNK 710
Engine Lathes
EUROPEAN LION 25-CU, 25 X 60
Engine Lathes
See more listings for this Brand
STANKO 5M150 NC
Gear Shapers
STANKO IS - S 1000
Gear Shapers
STANKO SM-1LG-2000
Internal Grinders
STANKO 60/63
Vertical Boring Mills (incld VTL)