To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. General Specifications: Capacity X-Axis Travel: 22.047" Y-Axis Travel: 25.196" Z-Axis Travel: 25.984" Table Loading Area: 15.75" x 15.75" Table Load: 880 lbs Part Diameter: 24.8" Part Height: 35.43" Indexing Table and Pallet Changer Indexing (Standard): 1 Degree 1-Degree Table Positioning Accuracy: +/- 3" 1-Degree Table Repeatability: +/- 1" Indexing Time (Includes Clamp/Unclamp) 0-90 Degrees: 1.1 seconds 0-180 Degrees: 1.45 seconds 0-270 Degrees: 1.83 seconds 0-360 Degrees: 2.18 seconds Pallet Surface (Standard, No Center Bushing): (24) M16 x 2.0 Tapped Holes Changing Method: Rotary Shuffle Pallet Change Time: 8 Second Motion: X-Axis Rapid Traverse Rate: 2,362 IPM Y-Axis Rapid Traverse Rate: 2,362 IPM Z-Axis Rapid Traverse Rate: 2,362 IPM X/Y/Z - Axis Acceleration: 1G Cutting Feed Rate: .04-2,362 IPM X-Axis Feed Thrust (Continuous): 2,113 lbs Y-Axis Feed Thrust (Continuous): 1,551 lbs Z-Axis Feed Thrust (Continuous): 2,113 lbs Positioning Accuracy (Full Stroke): +/- .00015" Repeatability: +/- .000060" Spindle Spindle Nose to Pallet Center: 3.15" - 29.13" Spindle Center to Pallet Top: 3.15" - 28.346" Big Plus Spindle System: CAT 40 Big Plus Spindle Speed: 15,000 RPM Spindle Motor (S3 25%): 25 / 49.6 HP Spindle Torque (S3 10%): 223.6 ft-lbs Spindle Acceleration / Declaration Time: 1.5 Seconds / 1.99 Seconds Automatic Tool Changer Specifications (Drum Type) Number of Positions: 60 Tool Selection: Random Access Tool Call Time: 2.9/5 Seconds (Nearby/Furthest) Pull Stud: 711-23 Tool Diameter (w/ Empty Adjacent Pods): 2.9" / 6.69" Tool Length: 17.71" Tool Weight: 26.45 lbs Tool Change Time (Tool to Tool, Less Than 16.5 lbs): .9 Seconds Tool Change Time (Tool to Tool, More Than 16.5 lbs): 1.3 Seconds Tool Change Time (Chip to Chip, Less Than 16.5 lbs: 2.3 Seconds Tool Change Time (Chip to Chip, More Than 16.5 lbs: 2.7 Seconds Power Required: 80 kVA / 210 amps @ 220V Voltage Required: 205-235 Volts / 3 Phase Machine Dimensions: 195" x 90.55" x 105.9" Machine Weight: 9,700 lbs