IronworkersGEKA HYDRACROP 110S
Illinois, United StatesOverview
Brand
Model
ID #
552681
Type
Condition
New In-Stock
Year
2022
Location
Illinois
United States
United States
Return Policy
as-is
Stock #
04282022
PRICE IS GOOD FOR SEPTEMBER PURCHASES ONLY PRICE AFTER SEPTEMBER IS $35,950.00
Geka Hydracrop 110 is an ironworker machine for punching, shearing, notching and angle, square and round bars cutting tasks. It can be managed by two workers at the same time thanks to its two cylinders. As a result, Geka Hydracrop 110 will save time and increase the efficiency of the user when working with its ironworker.
Geka Hydracrop 110 is part of Geka´s two-cylinder Ironworker machines series called Hydracrop. The five workstations of this ironworker machine are the following:
Punching
Angle shearing
Flat bars shearing
Bars cutting
Notching
FEATURES
Two independent working cylinders, one for the punch and one for the shear
Two remote foot pedals
Mitre cuts angles on 45° leg-in
Large single cut, no-slug-loss, "non-deform" angle cut
Large "non-deform" plate shear capacity, low rake on blade
Easy to adjust length of stroke
Ram keyed for shaped tooling
Quick change punch holder
Adjustable swing away stripper
Structural die holder for punching beams and channels in the flange
Deep punch throat 20"
Jog control
Round and square bar blades 3" and 4" channel shear blades
Rectangular coper or V-notcher
Plate shear support table with mitre guides
East to adjust blade gap
Safety lock-out for the coper/notcher station
Machine prewired for electric automatic length gauge
Easy access to the hydraulics (front and back)
Convert Specs to Metric
Angle (L1) | 6" |
Angle (L2) | 6" |
Angle (T) | 6" |
Tonnage | 110 T |
Power | 8.5 hp |
Throat | 12" |
Stroke | 3" |
Dimensions | 83 X 47 X 86 |
Weight | 7000 LBS |
Equipped With
Geka Hydracrop 110 Ironworker Machines
2 Cylinders Hydraulic ironworker machine with 2 working areas and 5 workstations.
FEATURES
Two independent working cylinders, one for the punch and one for the shear
Two remote foot pedals
Mitre cuts angles on 45° leg-in
Large single cut, no-slug-loss, "non-deform" angle cut
Large "non-deform" plate shear capacity, low rake on blade
Easy to adjust length of stroke
Ram keyed for shaped tooling
Quick change punch holder
Adjustable swing away stripper
Structural die holder for punching beams and channels in the flange
Deep punch throat 20"
Jog control
Round and square bar blades 3" and 4" channel shear blades
Rectangular coper or V-notcher
Plate shear support table with mitre guides
East to adjust blade gap
Safety lock-out for the coper/notcher station
Machine prewired for electric automatic length gauge
Easy access to the hydraulics (front and back)
Geka Hydracrop 110 is an ironworker machine for punching, shearing, notching and angle, square and round bars cutting tasks. It can be managed by two workers at the same time thanks to its two cylinders. As a result, Geka Hydracrop 110 will save time and increase the efficiency of the user when working with its ironworker.
Geka Hydracrop 110 is part of Geka´s two-cylinder Ironworker machines series called Hydracrop. The five workstations of this ironworker machine are the following:
Punching
Angle shearing
Flat bars shearing
Bars cutting
Notching
Spec Sheet
FEATURES GEKA HYDRACROP 110/180
Punching Power 120 US Tons
Punching Ø1-1/2″ x 3/4″
Ø1-3/32″ x 1-3/32″
Shearing Power 180 US Tons
Shears of Flat Bars and Plates 24″ x 5/8″
16″ x 3/4″
Shearing of Angles
(without deformation) 6″x6″x1/2″
Shearing of Solid Round and Square Bars
(Optional Blades) Ø 2″ and □ 2″
Rectangular Notching 3-1/2″ x 2″ x 1/2″
See more listings of this Model
GEKA HYDRACROP 110S
Ironworkers
See more listings of this Type
SCOTCHMAN 4014C
Ironworkers
MUBEA KLH 700/760
Ironworkers
EDWARDS 120 TON
Ironworkers
EDWARDS 100 TON DELUXE
Ironworkers