Gear ShapersLORENZ LS-424
Illinois, United StatesOverview
Brand
Model
ID #
453785
Type
Condition
Used - Good
Year
1999
Serial #
02-14788
Location
Illinois
United States
United States
Return Policy
30-day
Stock #
5543
*PRICE REDUCED*
This Lorenz LS 424 gear shaper is now available for purchase! The machine has undergone a complete re-control, reconditioning and modernization upgrades. We outfitted this shaper with brand new Fanuc 0i-MF CNC system, all new Fanuc Alpha HVi digital servomotors and drives as well as all new Fanuc Alpha series spindle motor. The machine has a an automatic tool/cutter release system, a tailstock and a power clamping system for the work pieces. It also have a very high riser installed, 150mm. Also this series of machine is equipped with a hydro-static guide, hydro-static lower bushing and side pads for very rigid cutting and stable capability.
The machine will come equipped with our renowned gear shaping software allowing for up to 4 sequential surfaces to be shaped, each with 5 cut passes. The control has skip cut capability to allow skipping to any of the cuts, or the final pass for a minute size adjustment. It also has clamp avoidance features and up and over cycle for splines or gears deep inside a bore.
You will be hard-pressed to find a Lorenz LS-424 in better condition than this one! (Subject to prior sale)
Convert Specs to Metric
Max Dia. Gear | 16.535" |
Dimensions | 5300x3900x3500mm |
Weight | 8500 kg |
Control | CNC (Fanuc 0-iF Plus with Fanuc Alpha Servos and Spindle) |
Equipped With
A full re-control by MTB including all new Fanuc 0-iF CNC, New Fanuc Alpha iHV Servo Drives and Motors.
Spec Sheet
Model
Manufacturer Lorenz
Model LS-424
Serial Number 02-14788
Year of manufacture 1999
Year of Recontrol 2023
Description
This CNC Lorenz LS-424 shaper now has all axes are under Fanuc 0i-MF Plus CNC control, X, B, C, L, Z and the spindle is an orienting system with servo-controlled orientation for TDC and BDC positions and with positive confirmation of arrival. The elevation and stroke length are combined within the allowable stroke length of the machine using the same servo motor but separate measuring techniques.
Mechanical Specifications
Number of CNC controlled axes 5
Number of CNC controlled spindles 1
Pitch rating 3.18 DP 8 mod
Maximum workpiece diameter (External) 16.535 in 420 mm
Maximum workpiece diameter (Internal) 14.567 in 370 mm
Maximum axial travel 6.063 in 154 mm
Worktable diameter 15.748 in 400 mm
Table bore diameter 4.921 in 125 mm
Cutter spindle diameter 3.937 in 100 mm
Maximum radial center distance 14.0 in 355 mm
Minimum radial center distance -.2756 in -7.0 mm
Maximum axial height from tabletop 18.3209 in 465.350 mm
Minimum axial height from tabletop 12.2578 in 311.348 mm
Riser height (can be changed if needed) 7.87 in 200 mm
Maximum face width 4.724 in 120 mm
Maximum stroke length 5.393 in 137 mm
Stroking speed range 100 to 800 SPM
Spindle Power 20.1 HP 15 kW
Radial feed rate Inch 0.0001 in/min 59.055 in/min
Radial feed rate Metric 0.001 mm/min 1500 mm/min
Rotary Feed Inch (at 18.0” Diam circle) 0.0001 in/min 56.69 in/min
Rotary Feed mm (at 458mm Diam circle) .001 mm/min 1440 mm/min
Rapid traverse radial 59.055 in/min 1500 mm/min
Rapid traverse axial 118.110 in/min 3000 mm/min
Rapid traverse speed of cutter 1440 deg/min 4 RPM
Rapid traverse speed of table 1440 deg/min 4 RPM
Machine Weight 18739 Lbs. 8500 kg
Plant power 460 VAC 60 Hz
Load 72 FLA
Disconnect rating 100 Amps
Primary Control voltages 24 VDC 120 VAC
See more listings of this Model
LORENZ LS-424
Gear Shapers
See more listings of this Type
FELLOWS FS-180
Gear Shapers
STANKO 5M150 NC
Gear Shapers
STANKO IS - S 1000
Gear Shapers
TOKYO KIKAI TF-64
Gear Shapers