CASTLE AT-RACE 12
The AT-Race Assembly Table clamping arms glide smoothly on an open beam that allows face frames to extend beyond the top of the table. Our redesigned quick-clamps feature dual handles and centere...
CASTLE AT-RACE 5
The AT-Race Assembly Table clamping arm glides smoothly on an open beam that allows face frames to extend beyond the top of the table. Our redesigned quick-clamps feature dual handles and centere...
CASTLE AT-RACE 8
The AT-Race Assembly Table clamping arm glides smoothly on an open beam that allows face frames to extend beyond the top of the table. Our redesigned quick-clamps feature dual handles and centere...
CASTLE CSI-1.5 D
Castle’s CSI-1.5 D Pocket Cutter/Screw Inserter saves time, reduces waste, and eliminates non-value-added labor and screw-handling motion trauma for high-production cabinet joinery. By using paten...
CASTLE TSM-12
Castle’s Bench-top Pocket Cutter is back in production. Re-released as the TSM-12, the machine has been updated with Bosch motors. The superior low screw angle minimizes joint shift. The TSM-12 cu...
CASTLE TSM-22
TSM-21 has been updated with a lift up lid for easy access to tooling. Receive the same quality you’ve known for years. The TSM-22 clamps the stock, routs a pocket and drills a pilot hole with a ta...
CASTLE TSM-31
Castle introduces the TSM-31 Pocket Cutter with all the same great features you get on our TSM-35, now available in Single Phase. Featuring the heavy duty performance along with easy top down acces...
CASTLE TSM-35
The TSM-35, now with a Swing Front providing easy access for faster tooling changes and service, cuts the same patented 6 degree Castle Pocket as the TSM-22. This machine is designed for continuous...
COSTA B
The B Series brings true industrial capability to the brushing application environment. This machine family enables our clients to insert brushing units in their production cycles where it makes th...
COSTA K
350mm to 3200mm working widths. The K series calibrating+sanding machine family is employed in nearly all wood cycle applications including the panel industry, flooring, kitchens, and custom wood ...
COSTA MB2
The MB2 is equipped with one bottom and one top XVS multifunction brushing units for all deburring operations and oxide removal, in a single pass. These units are composed by a series of vertical...
COSTA MB4
COSTA MD4
Universal working center for deburring and finishing ferrous and non ferrous materials. These machines are available with variable height, working width of 1150mm. Thanks to its modular concept, i...
COSTA MD5
Universal working center for deburring and finishing ferrous and non ferrous materials. These machines are available with constant feed height for in-line operation, and to simplify the processing ...
COSTA MD6
This series, available with a working width of 1350mm, combines the heavy-duty technology of industrial grinding machines with working units dedicated for deburring applications. These machines can...
COSTA MD7
This series combines the heavy-duty technology of industrial grinding machines with working units dedicated for deburring applications. Available in working widths from 650mm to 1650mm, these mac...
COSTA MP
The MP-WP series polishing machine families are Costa's solution for wide wet or dry processing of sheets and coils. The entire MP-WP Series familes are fully customizable. They can be built in d...
COSTA S
Working width 350mm to 3200mm The S Series machine family represents the largest range available in the sanding machine industry today. Its market-matched capacities, extended life, and economic e...
COSTA SK
The SK Series calibrating-sanding machine is our all-in-one solution for the small industrial user. The SK-Series machine comes in several different configurations with drums and pads. Available ...
COSTA WP
COSTA WP9
The MP-WP series polishing machine families are Costa's solution for wide wet or dry processing of sheets and coils. The entire MP-WP Series familes are fully customizable. They can be built in d...
COSTA XGS
The XGS Technology is Costa's exclusive solution to sand the cross-grain scratch through the use of standard size longitudinal sanding belts. The Costa XGS system removes 100% of the cross-grain at...
CTD 12DC
CTD 225
CTD A500
CTD A500M
CTD CDM60
CTD D45
CTD D45AX
CTD F255R
CTD F426
CTD F526
CTD PF200
CTD PF400
CTD PFW218
CTD RABBET
CTD VISION GAGE
CTD W218
CTD W222
CTD W222CMC
CTD W222M
DENRAY MACHINE 2635G
This model is perfect for work on smaller parts. The 2635G is designed to capture dust created during grinding with hand-held grinders. This model comes standard with one spunbond flame retardant f...
DENRAY MACHINE 2800
This model is great for lighter applications of sanding plastics, woods, and finishing materials. The 2800 model comes with tube filtration which cleans with a 99% capture rate at 1 micron, making ...
DENRAY MACHINE 2872
This model is great for medium sized jobs and can be used for plastics, woods and finishing materials. The 2872 comes with tube filtration which cleans with a 99% capture rate at 1 micron, making t...
DENRAY MACHINE 2872B
This model is great for medium sized jobs, and can be used for plastics, woods and finishing materials. The 2872B comes with 80/20 cartridge filters which clean with a 99.95% capture rate at 0.5 mi...
DENRAY MACHINE 2872G
This model is designed to accommodate a variety of sanding, metal grinding, welding, and light plasma applications. The 2872G comes standard with one 100% polyester flame retardant filter, which cl...
DENRAY MACHINE 2896
This model is ideal for medium sized jobs, and can be used for plastics, woods, and finishing materials. The 2896 comes with tube filtration system which cleans with a 99% capture rate at 1 micron,...
DENRAY MACHINE 3444B
This model is great for smaller shops, and can be used for plastics, woods and finishing materials. The 3444B comes with 80/20 cartridge filters which clean with a 99.95% capture rate at 0.5 micron...
DENRAY MACHINE 3444B SUPER
This model is similar to the 3444B, but contains a larger fan and motor, along with our typical rails and tops found on our larger tables. There are no intake dust ports or vise due to these modifi...
DENRAY MACHINE 3644CG
Denray has designed a table for the budget minded company. This unit is designed for TIG welding and most MIG welding applications. With 3 stages of filters, first a 2" thick steel mesh spark arres...