REGG INSPECTION I300-S
The i-300 machine series has been design for fast and accurate vision inspection needs.
REGG INSPECTION I300-V
The i-300 machine series has been design for fast and accurate vision inspection needs.
REGG INSPECTION I600-LF
The i-600 machine series has been design for the most comprehensive inspection needs.
REGG INSPECTION I600-M
The i-600 machine series has been design for the most comprehensive inspection needs.
REGG INSPECTION I600-MF
The i-600 machine series has been design for the most comprehensive inspection needs.
REGG INSPECTION I600-N
The i-600 machine series has been design for the most comprehensive inspection needs.
REGG INSPECTION I600-SFR
The i-600 machine series has been design for the most comprehensive inspection needs.
REGG INSPECTION I900 LINEAR
The i-900 Linear machine series has been design for fast and accurate vision inspection needs of flat or headless parts.
RTT MIP
RTT’s Mobile Inspection Platform (MIP) was tested and validated at Tennessee Valley Authority (TVA) sites. Today, the system is commercially available and used to test furnaces, tanks, penstocks a...
SARDA MAGNETS 72102
MOBILE CRACK DETECTORS Powerful magnets with rotation head. Movable yoke covering inspection area up to 500mm. Light weight, no electricity needed. Complete kit with standard crack test block, Bla...
SARDA MAGNETS 72103
MOBILE CRACK DETECTORS Powerful magnets with rotation head. Movable yoke covering inspection area up to 500mm. Light weight, no electricity needed. Complete kit with standard crack test block, Bla...
SKF MZC 14A
The MZC has been specifically developed for the inspection of roller track surfaces to detect.
SKF MZC 25A
The MZC has been specifically developed for the inspection of roller track surfaces to detect.
SKF MZL 50A
The MZL 50A is the first in-line machine able to check all important features of bearing seals – in this case, shaft seals. For each side of the seal, two lasers project lines onto the side of th...
SKF MZS 35D
The MZS 35D is developed for the detection of defective rollers with a throughput of approximately 1 250 rollers/hour. This device is used for inspecting the track and both roller ends.
SKF MZU 120B/C
The MZU 120B/C is a low cost, stand-alone vision system. The camera, processor and PLC are integrated in to a unit the size of a conventional camera. It can autonomously detect and sort out outlier...
SXKH TMG1008
Mold Inspection Machine The inspection machine can be equipped with a quick die change system on both platen, in order to improve the efficiency of mold loading and unloading. Mold can be tilted b...
SXKH TMG1518
Mold Inspection Machine The inspection machine can be equipped with a quick die change system on both platen, in order to improve the efficiency of mold loading and unloading. Mold can be tilted b...
SXKH TMG2120
Mold Inspection Machine The inspection machine can be equipped with a quick die change system on both platen, in order to improve the efficiency of mold loading and unloading. Mold can be tilted b...
TIME TIME®2511
Features ● Economical model with F probe integrated ● Single point measurement mode ● Easy zero point calibration ● 3 kinds of adjustable resolutions for different applications ● High speed data c...
WINSLOW ENGINEERING 560 DRO
560 DRO Tool Analyzer Permits rapid, precision inspection of all tool geometry characteristics in the regrind department. The system uses a combination of angular measurement by optics with linear ...
WINSLOW ENGINEERING 560 MINI
560 Mini Video Tool Analyzer Permits rapid, precision inspection of all tool geometry characteristics in the grind and regrind department. The system uses a digital camera and software combination ...
WINSLOW ENGINEERING 560 SCOPE
560 Scope Tool Analyzer Permits rapid, precision inspection of all tool geometry characteristics in the regrind department. The system uses a combination of angular measurement by optics with linea...
WINSLOW ENGINEERING 560 VIDEO
Permits rapid, precision inspection of all tool geometry characteristics in new tool manufacture as well as tool regrind. The system uses a series of lenses and a camera. The image of the tool bein...
WINSLOW ENGINEERING 560L VIDEO
The Model 560L Video Tool Analyzer permits rapid, precise inspection of all tool geometry characteristics in new tool manufacturing as well as tool regrind. The system uses a series of lenses and a...
WINSLOW ENGINEERING 560S
The Model 560S Video permits rapid, precise inspection of all tool geometry characteristics in new tool manufacturing as well as tool regrind. The system uses a series of lenses and a digital camer...