Reciprocating FlachschleifmaschinenCLAUSING CSG3A1020
New Jersey, Vereinigte Staaten von AmerikaÜberblick
Marke
Modell
ID#
612324
Jahr
2012
Standort
New Jersey
Vereinigte Staaten von Amerika
Vereinigte Staaten von Amerika
Lager #
169308
10" Width 20" Length Clausing CSG-3A1020, FROM A COLLEGE RESEARCH LAB, DRO, EMC, SURFACE GRINDER, COOLANT
Konvertieren Specs zu Metric
Tabelle-W | 6" |
Tabelle-L | 18" |
Horiz./vert. | Horz |
Strom | 2 hp |
Schleifrad, Breite | 0.5" |
Schleifrad-Durchmesser | 8" |
Datenblatt
10" x 20" CLAUSING "EQUIPTOP"
TWO-AXIS AUTOMATIC FEEDS
SURFACE GRINDER
WITH DRO
LIKE NEW FROM A COLLEGE RESEARCH LAB!!
MODEL NO. CSG-3A1020 NEW: 2012
TABLE SIZE ............................ 10" x 20"
MAX. GRINDING LENGTH .................. 20.47"
MAX. GRINDING WIDTH ................... 11"
MAX. DISTANCE FROM TABLE TO SPINDLE
CENTERLINE .......................... 19.68"
LONGITUDINAL TABLE TRAVEL, MANUAL ..... 24.41”
LONGITUDINAL TRABLE TRAVEL, HYD. ...... 22.83”
TABLE SPEED, INFIN. VARIABLE ..... 196" TO 984" IPM
AUTO CROSSFEED INCREMENT .............. 0.04" TO 0.5"
MAX AUTO CROSSFEDD TRAVEL ............. 10.63"
MAX MANUAL CROSS TRAVEL ............... 11.81”
CROSSFEED HANDWHEEL, ONE REV. = ....... 0.2"
CROSSFEED HANDWHEEL, GRAD. ............ 0.001"
WHEELHEAD:
RAPID TRAVERSE RATE ................... 6" IPM
VERTICAL HANDWHEEL, ONE REV. = ........ 0.04"
VERTICAL HANDWHEEL, GRAD. ............. 0.0005"
GRINDING SPINDLE DRIVE SPEED .......... 3450 RPM
STD. GRINDING WHEEL ............. 8"DIA. x 3/4" TO 1"W x 1.25"B
FLOOR SPACE REQUIRED APPROX ..... 94.5"L-R x 57.5"D x 69"H
APPROX WEIGHT ......................... 3,990 LBS.
Features:
Column • Wide, deep base & honeycomb ribbing are especially
suitable for heavy duty grinding.
Construction • Table, saddle and base are cast from
high grade iron, and strong ribbing for better accuracy.
Spindle • Large diameter spindle is supported by four
preloaded precision angular contact ball bearings and one
NU Type Roller bearing for durable, heavy duty operation.
Enlarged Column & Base • Enlarged column & base create
high stability & rigidity. The maximum height is 18”
from table surface to the center line of spindle.
Slideways • Vertical, cross (double V’s) and longitudinal
(V & flat) slideways are coated with Turcite-B, to provide
stable movement, durability, and accuracy.
Automatic Continuous Lubrication System •
All slideways and screws are fully oiled by automatic
continuous lubrication system to minimize wear on
slideways & screws.
Cross Feed • Ball screw for cross travel, powered
by AC motor.
Proximity • Has a built-in type (hidden) proximity switch
for easy operation.
Table Speed Control • Presettable hydraulic table speed
control allows operator to pre-set speed rate, enables
you to have same speed rate when engaging hydraulic table
every time.
EQUIPPED WITH:
"ACU-RITE" TWO-AXIS DIGITAL READOUT DISPLAY
10" x 20" STD. POLE, CROSS PATTERN, ELECTRO-MAGNETIC CHUCK
VARIABLE HOLD NEUTROFIER CONTROL
COOLANT SYSTEM WITH BOTH PAPER FILTRATION AND
MAGETIC SEPARATOR
3 H.P./230-460 VOLT GRINDING SPINDLE MOTOR
MACHINE IS PRESENTLY WIRED FOR 3/60/230 VOLTS
** LIKE NEW CONDITION & APPEARANCE (ORIGINAL PAINT) **
** PURCHASED FROM A COLLEGE RESEARCH LAB! **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
FOR MORE INFORMATION: Call Andy at 973-497-7600
Weitere Immobilien des dieser Art
MATTISON 12X48
Reciprocating Flachschleifmaschinen
GALLMEYER & LIVINGSTON A
Reciprocating Flachschleifmaschinen
MATTISON
Reciprocating Flachschleifmaschinen
THOMPSON
Reciprocating Flachschleifmaschinen
Weitere Immobilien für diese Marke
CLAUSING TORNADO 200
CNC-Drehmaschinen
CLAUSING STORM 100A
CNC-Drehmaschinen
CLAUSING CSG-1228ASD
Reciprocating Flachschleifmaschinen
CLAUSING KONDIA FV1 CNC MILL
Vertikale und horizontale Mills