13' x 22' CMS Aquatec 3400 + 3400 5-Axis Twin Table CNC Waterjet System New: 2017 More pictures and videos available here: https://www.dropbox.com/sh/egoqo8v2tgqfrqx/AADIOyJJD0-NQZ2i07IPSs9ka?dl=0 STANDARD TECHNICAL FEATURES * X Axis stroke 4020/ 158 Mm (“) Y Axis stroke TO BE DEFINED mm(“) Approx 22’ Z Axis stroke 530/ mm(“) X axes max feedrate 54000 mm/ min Y axes max feedrate 54000 mm/ min Z axes max feedrate 12600 mm/ min X acceleration 2 m/ s2 Y acceleration 2 m/ s2 Z acceleration 1 m/ s2 XY Worktable area regular table 4000 x 2000(157.4 x 78.7) mm(“) XY Worktable area regular table 4000 x 3000(157.4 x 118.1) mm(“) Loading capacity 1000 Kg/ m2 Dynamic precision + / - 0,10 mm Repeatability “ Ps” + / - 0,025 mm Power 13 kW Total Size LxDxH (with light barriers) TO BE DEFINED mm Weight TO BE DEFINED Kg   A 5 Axes Head provides 5 axes capability to the machine allowing chamfer and 3D cutting, produces more accurate parts at significantly higher cutting speeds than parts cut with conventional systems.   STANDARD TECHNICAL FEATURES * B Axis +/- 60 ° C Axis +/- 340 ° B axes max feedrate 17200 °/min C axes max feedrate 13400 °/min B acceleration 1450 °/s2 C acceleration 850 °/s2   WORKING IN AREA 1 (2) AND LOADING/UNLOADING AREA 2 (1) The machine allows to stop the photocells in area 2 (1) without interrupting the working operations in area 1 (2) only in the working unit is in area 1 (2), with photocells between the tanks activated. The safety is granted by the photocells and the area limit switches avoiding the working unit to enter the area 2 (1) for loading/unloading.   Working area n°1 (front side) X = 4000mm (X=0 right limit - X=-4000 left limit) Y / V = 3000mm (Y=0 front limit – Y= to be defined rear limit)   Working area n°2 (rear side) X = 4000mm (X=0 right limit - X=-4000 left limit) Y / V = 3000mm (Y=3300 front limit – Y= to be defined rear limit)   PRESSURIZED ABRASIVE CONVEYING SYSTEM (330 KG NUMERICAL CONTROL OSAI OPEN-M   PORTABLE CONTROL UNIT WITH REMOTE COMMANDS UP TO 6 AXES   DREDGE FOR ABRASIVE REMOVAL FROM THE TANK: 1ST DREDGE FOR 3040 TANK AND 2ND DREDGE FOR 3040 TANK PROGRAMMING SOFTWARE EASYJET 5 AXES It is a CAD/CAM software package installed in a personal computer working in Windows for the generation of work programs. QTY (1) DDX PHOTO LICENSE & QTY (2) CAMERA IN ENCLOSURE & QTY (2) CAMERA STANDS HIGH PRESSURE INTENSIFIER POWER 60 HP – PRESSURE 4130 BAR JETPOWER EVO TECHNICAL FEATURES   Installed Power 60 (45) HP (kW) Voltage (three-phase) 400 ± 5% Volt 50 - 60 Hz Max water pressure 413,7 Mpa (60.000 PSI) Max flow rate 5 (1.32) liters/minute (gal/min) Water consumption from 0 to 5 (1.32) lliters/minute (gal/min) Max diameter of the orifice 0,40 millimeters Oil tank capacity 250 (39.6) liters (gal) Cooling requirements Oil/water heat exchanger* 3.2 gal/min water @ max 70ºF * Dimensions 36" (900) x 59" (1500) x 58" (1560) H Inch/millimeters Weight 1350 kg   Notes: This machine replaces for over $550,000 today has low hours use and is immediately available. For application assistace contact CMS America, Mr. Roberto Impellitiere 616-250-5380