Vertikal-BearbeitungszentrenSHARP SV-2412
Texas, Vereinigte Staaten von AmerikaÜberblick
Marke
Modell
ID#
570595
Zustand
Gebraucht - Gut
Jahr
2006
Serie #
40100426
Standort
Texas
Vereinigte Staaten von Amerika
Vereinigte Staaten von Amerika
Lager #
M085155
Used Sharp Vertical Machining Center Model SV-2412 With Fanuc 0i-Mate MD
Konvertieren Specs zu Metric
X | 24" |
Y | 12" |
Z | 18" |
Strom | 7.5 hp |
UPM | 10,000 RPM |
# ATC | 10 |
Kegelaufnahme | 40 |
Tabelle-W | 12" |
Tabelle-L | 27.5" |
Achse | 3 |
Abmessungen | R-L 72.8" X F-B 78" X Height 94.5" |
Gewicht | 6,100 Lbs. |
Datenblatt
Standard Machine Specifications
Specifications SV-2412
Work Capacity
X axis travel mm (inch)............................610 (24)
Y axis travel mm (inch)............................305 (12)
Z axis travel mm (inch)............................460 (18.1)
Spindle nose to table mm (inch)....................70-530 (2.8-20.9)
Spindle center to column mm (inch).................415 (16.3)
Worktable
Table area mm (inch)...............................700 x 308 (27.6 x 12.1)
Floor to table mm (inch)...........................835 (32.9)
Max. workpiece weight kg (lb.).....................350 (770)
T-Slot (Number x Width x Pitch)....................4 x 16 x 63.5 (4 x 0.6 x 2.5)
Spindle
Spindle taper......................................CAT-40
Spindle speed rpm..................................120 To 10,000 Rpm's
Spindle motor: cont................................10 Hp
Transmission Belt
Automatic Tool Changer
ATC type Armless
Tool capacity......................................12
Max. tool diameter mm (inch).......................120 (4.7)
Without adjacent tool mm (inch)....................150 (5.9)
Max. tool length mm (inch).........................300 (11.8)
Max. tool weight kg (lb.)..........................7 (15.4)
Tool change time (tool to tool)....................7.5 sec
Tool change time (chip to chip)....................8.1 sec
Method of tool selection Address code
Motion
Rapid traverse.....................................787 IPM
Cutting feed rate 393 IPM
Transmission Direct drive
Ball screw diameter / pitch mm (inch)..............32 / 10 (1.3 / 0.4)
Feed motor (Fanuc) nm (ft/lb.) X/Y:................12 (8.9) / Z: 22 (16.2)
Max. thrust kgf (lb.) X/Y: 1773 (3909) / Z:........3251 (7167)
Positioning accuracy* mm (inch) +/-................0.005 (0.0002)
Repeatability accuracy* mm (inch) +/-..............0.0025 (0.0001)
Coolant System
Coolant tank capacity L (gal)......................160 (42)
Coolant Flow L/min (gal/min).......................150 (40)
Machine Size
Floor space (w/o chip conveyor) R-L................72.8 X F-B 78"
Height.............................................94.5"
Weight.............................................6,100 Lbs.
Door opening mm (inch).............................640 (25.2)
Power Requirements
Electrical.........................................220V / 60 Hz 3 Phase /
...................................................15 KVA 3 Phase / 18 KVA
Air................................................5 CFM @ 100 psi
Rigid Tapping......................................Yes
Note: Cleaned and cycled.
Sehen Sie mehr Angebote dieses Modell
Weitere Immobilien des dieser Art
HAAS MINI MILL
Vertikal-Bearbeitungszentren
NTC NV-4G
Vertikal-Bearbeitungszentren
FEELER FV-800A
Vertikal-Bearbeitungszentren
ENSHU S400
Vertikal-Bearbeitungszentren
Weitere Immobilien für diese Marke
SHARP LMV
Vertikale Mills
SHARP 1118H
Drehmaschinen
SHARP 2680B
Motor Drehmaschinen
SHARP KMA-3H
Bettentyp Mills