Macrodyne Press 450 Ton Type MPT Hydraulic Transfer Press in accordance to Tech Spec S2144144/4 Maximum pressing force 450 tons Maximum stripping force 45 tons Maximum net lifting force 5 tons Usable bolster size (L-R x F-B) 90" x 36" Usable slide size (L-R x F-B) 90" x 36" Distance between tension members (L-R) 91" Distance between tension members (F-B) 24" Daylight 36" Shut height 24" Stroke 12" Width of press (L-R) 127" Depth of press (F-B) 57" Height of top of bed above floor 42" Height of press (approx) 16'-11" Weight of press (approx.) 100,000 lbs. Speeds Fast approach speed 800 in./min. Pre-pressing speed to 50 tons 75 in./min. Pressing speed 3 - 25 in./min. Fast return speed 800 in./min. The following speeds provide a cycle time for the press and transfer of approximately 12 seconds or 5.0 spm based on the following working stroke excluding the times for both dwell and press loading/unloading time. Fast approach speed - 8.5" @ 800 in./min. 0.64seconds Pre-pressing speed - 3.0" @ 75 in./min. 2.40 seconds Pressing speed - 0.5" @ 25 in./min. 1.20 seconds Fast return speed - 12" @ 800 in./min. 0.90 seconds Acceleration, deceleration, compression, decompression, PLC scan & valving time, etc. 1.16 seconds Press cycle time 6.30 seconds Transfer time 5.70 seconds Total press and transfer time 12.00 seconds System Pressure Hydraulic system operating pressure 315 bar Installed Power Primary pumping arrangement 1 @ 100 HP Cooling, filtratio