Revolverdrehmaschinen (Ram & Saddle)WARNER & SWASEY 4A MODEL 3550 LOT 777
Vereinigte Staaten von AmerikaÜberblick
Marke
Modell
4A MODEL 3550 LOT 777
ID#
549496
Zustand
Gebraucht - Gut
Jahr
1977
Serie #
2804207
Standort
Vereinigte Staaten von Amerika
Lager #
L640487
1977 Used Warner & Swasey Square Head 4A Model 3550 Lot 777 Saddle Type Turret Lathe
Konvertieren Specs zu Metric
Model | 4A M-3550 |
Drehdurchmesser | 28.25" |
Center Distance | 62 in |
Abmessungen | 22' Long. X 84" Wide X 84" High |
Gewicht | 24,000 Lbs. |
Ausgestattet mit
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 24"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $149,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO and deposit are received.
Estimated time frame six to eight weeks
Option:
Used 24" 3-Jaw Power Chuck And Wrench $12,500.00 Installed
Datenblatt
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Center Distance 62"
Spindle Hole 9-1/4"
Spindle Speeds 20 To 526 Rpm's
Spindle Nose A-15
Chuck Size (New Heavy Duty) 24" 4- Jaw New Gator
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor Hp. 75 / 37.5
Floor Space Right To Left 22'
Floor Space Front To Back 7'
Machine Height 84"
Weight 24,000 Lbs.
Flange Holders 4
Tool Post 4 Way On Front Yes
Rapid Traverse Front And Rear Yes
Cross Sliding Rear Turret Yes
Taper Attachment Rear Turret
Full Chip Pan And Coolant Yes
Coolant Yes
Note: Machine will be cleaned, painted, and cycled.
Machine in good running order.
Weitere Immobilien des dieser Art
GISHOLT 4L
Revolverdrehmaschinen (Ram & Saddle)
GISHOLT 5L
Revolverdrehmaschinen (Ram & Saddle)
WARNER & SWASEY 4A M-3550
Revolverdrehmaschinen (Ram & Saddle)
WARNER & SWASEY M-3580
Revolverdrehmaschinen (Ram & Saddle)
Weitere Immobilien für diese Marke
WARNER & SWASEY LU4
Universal-Rundschleifmaschinen
WARNER & SWASEY LCV5
Rundschleifmaschinen Inklusive Plain & Winkelkopf
WARNER & SWASEY C5
Rundschleifmaschinen Inklusive Plain & Winkelkopf
WARNER & SWASEY
Rundschleifmaschinen Inklusive Plain & Winkelkopf