AIR QUALITY ENGINEERING AQE2000
AIR QUALITY ENGINEERING AQE4000
AIR QUALITY ENGINEERING F33V1003
AIR QUALITY ENGINEERING F33V1011
AIR QUALITY ENGINEERING F62B
AIR QUALITY ENGINEERING F66
AIR QUALITY ENGINEERING F73A
AIR QUALITY ENGINEERING F73B
AIR QUALITY ENGINEERING FUMEFIGHTER
AIR QUALITY ENGINEERING M2660
AIR QUALITY ENGINEERING M32
AIR QUALITY ENGINEERING M32V
AIR QUALITY ENGINEERING M33
The M33 is a self-contained media air cleaning system designed for general background or ducted for source capture applications. The M33 can be ordered with three-stage filtration which will effect...
AIR QUALITY ENGINEERING M330-1003
AIR QUALITY ENGINEERING M330-1011
AIR QUALITY ENGINEERING M33O
AIR QUALITY ENGINEERING M33V
AIR QUALITY ENGINEERING M3660
AIR QUALITY ENGINEERING M4660
AIR QUALITY ENGINEERING M66
AIR QUALITY ENGINEERING M660
AIR QUALITY ENGINEERING M68
AIR QUALITY ENGINEERING M68V
AIR QUALITY ENGINEERING M72
AIR QUALITY ENGINEERING MISTBUSTER 2000
AIR QUALITY ENGINEERING MISTBUSTER 500
AIR QUALITY ENGINEERING MISTBUSTER 500 MEDIA
AIR QUALITY ENGINEERING MISTBUSTER 850
AIR QUALITY ENGINEERING MISTBUSTER INFINITY
AIR QUALITY ENGINEERING PORTA-AIR
AIR QUALITY ENGINEERING SMOKEMASTER M67
The Smokemaster M67 is a self-contained multi-stage media air cleaning system / industrial air filtration system designed for general background cleaning of dust, smoke, soot or other airborne part...
BLUM-NOVOTEST 4-SQUARE
With the test rig the following parameters are measured and controlled: speed, torque, jouance, steering angle. Four shafts are simultaneously tested in a closed loop, with multi-block programs. Al...
BLUM-NOVOTEST BMK 3
The BMK 3 is a flexible, modularly extendable measuring cell, which is able to perform additional tasks, e.g. identification, sorting, classifying, identifying and packaging of components, if appro...
BLUM-NOVOTEST BMK 5
The BMK 5 is a flexible, modularly extendable measuring cell, which is able to perform additional tasks such as handling, labelling and packaging of components, if appropriate modules are integrate...
BLUM-NOVOTEST COOLER
The impulse test stands are used to perform life-cycle tests for coolers. In addition to various pressure functions, the specimens are subjected to different temperature ranges. In this context, cu...
BLUM-NOVOTEST CRACK DETECTION
The crack detection systems cover a broad application field for impartial 100%-testing of safety-critical rotationally symmetrical workpieces such as drive shafts, wheel hubs or brake discs. Non-d...
BLUM-NOVOTEST DIFFERENTIAL HOUSINGS
Special Measuring System for differential housings (HGV)
BLUM-NOVOTEST DOUBLE-CLUTCH
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST E-DRIVE TRANSMISSION
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FLEXIBLE 2D
Primarily integrated into production lines, but also when used on a stand-alone basis, the flexible 2D measuring machines in vertical or horizontal design perform highly accurate measurements right...
BLUM-NOVOTEST FRONT-LENGHTHWISE
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FRONT-TRANSVERSE
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FUNCTION TEST RIG
The test rig is designed for measurement of functional values of drive shafts.
BLUM-NOVOTEST GAUGE/BURST
The test stand, shown on the first picture below, is designed for burst testing of hydraulic hoses or pipe sections at a max. pressure of 3000 bar. The key components of the test stand are a test ...
BLUM-NOVOTEST HEAVY-TRUCK
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST HOT/COLD BOOT TEST RIG
This climatic chamber is used to perform endurance tess of boots.
BLUM-NOVOTEST HYDRAULIC VALVES
The testing system consists of two autonomous conveyor belts, each with one loading section, 20 pallets, 3 test stations with drainage device as well as an unloading section with trays. All test st...
BLUM-NOVOTEST IMPULSE
The test stands are optimised for industrial testing norms, some of which use large hosediameters up to 2” as well as fluid temperature control up to 160 °C. The test stands are equipped with a wal...
BLUM-NOVOTEST IMPULSE AUTOMOTIVE
The test stands for the automotive industry allow the connection of up to 24 specimens. A special feature of the tests is the ability to perform reliable tests at temperatures ranging from -40 °C t...
BLUM-NOVOTEST LASERCONTROL EC
LaserControl EC Basic system for fast broken tool detection