DAVRON DTI-1000
The DTI-1000 batch oven dries ceramic material in a honeycomb catalyst product. Products, which can be either small blocks or trays of powder, are loaded onto a product cart. This product cart con...
DAVRON DTI-1001
The DTI-1001 conveyor oven is used to cure a coating on steel components used in the automotive industry. The coating is screen printed robotically on each part prior to the cure oven. Parts are lo...
DAVRON DTI-1003
The DTI-1003 Curing Tunnel Oven is used to cure a coating on copper wire used in the manufacturing of electric motors. The cooper wire is one spool and is pulled through the oven chamber by a take...
DAVRON DTI-1004
The DTI-1004 batch ovens preheat steel molds used in the plastic industry. These batch ovens are designed so that the roofs are clear of all components, allowing the ovens to be stacked on top of o...
DAVRON DTI-1005
The DTI-1005 batch oven anneals plastic products of various shapes and sizes. This batch oven is designed for a maximum product load of 1,000 pounds. This oven includes six (6) product shelves equa...
DAVRON DTI-1011
The DTI-1011 conveyor oven is divided into four individually heated zones of control. Each zone is heated by a modulating natural gas fired burner system. The conveyor belt is a wire mesh woven typ...
DAVRON DTI-1028
The DTI-1028 vertical curing oven is used to cure carbon filters. The filters are loaded into custom fixtures and enter the heated chamber. The fixtures are indexed through the heated chamber in a ...
DAVRON DTI-1031
The DTI-1031 muffle annealing furnace anneals glass components used in the automotive industry. In this particular project, DTI did not provide the custom conveying system. The customer provided al...
DAVRON DTI-1032
This Pre Heat Batch Oven is used in the plastic manufacturing industry to pre heat molds. The molds are steel and the maximum weight of molds per batch is 6,000 pounds. The oven utilizes a subway g...
DAVRON DTI-1046
The DTI-1046 batch drying oven is used to dry sheets of polyurethane foam. The product is loaded into the oven via custom product carts. The drying oven utilizes recessed floor tracks to accommod...
DAVRON DTI-1058
The DTI-1058 batch oven dries copper windings in large electrical transformers. The size of the part being processed in the oven is approximately 15′-6″ L x 9′-5″ W x 10′-3″ H. The part can weigh...
DAVRON DTI-1061
The DTI-1061 stress relieving conveyor oven operates in a continuous manner at approximately 8′ per minute. The oven is used to stress relieve spring bundles used in the furniture industry. The o...
DAVRON DTI-1078
The DTI-1078 batch oven dries ceramic material in a honeycomb catalyst product. Product, which can be either small blocks or trays of powder, are loaded onto a product cart. The product cart cont...
DAVRON DTI-1084
The DTI-1084 Custom Contact Preheat System is a thermoforming oven used in the manufacturing of automotive interior components. The system includes 2 multi zone heated platens. Each platen (top and...
DAVRON DTI-1086
The DTI-1086 Batch Curing Oven serves a dual purpose. It is used for both curing and performing reliability test on polypropylene windings. These windings are used in the manufacturing of Film Ca...
DAVRON DTI-1090
The DTI-1090 Batch Baking Oven is used for fast heat up of oil field piping used in the off shore drilling industry. The size of the piping being processed in the oven are approximately 14″ diame...
DAVRON DTI-1092
The DTI-1092 batch drying oven dries ceramic modules used in the power generation industry. The drying oven includes two (2) custom product pallets. These pallets are used for loading and unloadi...
DAVRON DTI-1096
The DTI-1096 batch oven is used to preheat steel molds used in the automotive industry. The molds are processed in groups of 12 and weigh approximately 16,000 pounds. The operating temperature ra...
DAVRON DTI-1098
The DTI-1098 Continuous Conveyor Expanding Oven is designed to provide six (6) zones of temperature control along the length of the system. All zones are heated by independently controlled modulati...
DAVRON DTI-1109
This batch curing oven is used to cure a varnish on stators used in the manufacturing of electric generators. The oven utilizes two (2) individual chambers in one (1) common oven body with each ch...
DAVRON DTI-1113
The DTI-1113 curing conveyor oven operates in a continuous manner. The curing oven chamber is divided into two (2) individual zones of control to allow more flexibility for the process requirement...
DAVRON DTI-1118
The DTI-1118 inert atmosphere batch oven is used in the manufacturing of membranes that are used in blood purification processes.The oven can accommodate up to four (4) rolls of membrane in the ove...
DAVRON DTI-1123
The DTI-1123 custom inert batch oven is used in the plastics industry for annealing product. Approximately 2,000 pounds of product (plastic rods) are loaded into the inert atmosphere oven via a cus...
DAVRON DTI-1133
The DTI-1133 specialized oven system is a thermoforming solution that preheats automotive textile products prior to press forming. This system utilizes two individual alternating rack systems. This...
DAVRON DTI-1134
The DTI-1134 custom continuous scorching system is used in the manufacturing of disc brake pads. The system utilizes two (2) heated platens. Each platen contains twelve (12) rod heaters to heat the...
DAVRON DTI-1135
The DTI-1135 vertical oven cures a coating on steel components used in the automotive industry. The coating is applied to the exterior surface of the parts and the parts are then loaded into the ov...
DAVRON DTI-1138
The DTI-1138 industrial oven is a thermoforming solution that preheats interior components used in the automotive industry. Product can be loaded on the oven conveying system with an automated pic...
DAVRON DTI-1139
The DTI-1139 industrial oven is a a thermoforming solution that preheats interior components used in the automotive industry. Product can be loaded on the oven conveying system with an automated p...
DAVRON DTI-1140
The DTI-1140 Indexing Conveyor Oven System is used to heat treat steel components used in the automotive industry. The system includes 1 oven, 1 quench tank, 1 rinse tank, and a pick and place syst...
DAVRON DTI-1144
The DTI-1144 conveyor oven cures automotive disc brake pads after press forming. The press formed parts are manually loaded from the presses into the conveyor oven to provide continuous product flo...
DAVRON DTI-1156
The DTI-1156 Custom Contact Preheat System is a thermoforming solution used in the manufacturing of automotive interior components. The system includes 2 multi zone heated platens. Each platen (top...
DAVRON DTI-1158
The DTI-1158 industrial oven is used to develop curing processes for brake pads in the automotive industry. This custom oven is designed to simulate the process used in an indexing or continuous fl...
DAVRON DTI-1160
The DTI-1160 indexing conveyor oven is used to temper alloy steel rods after a chroming process. The rods are used in the manufacturing of automotive suspension systems. The rods are loaded vertica...
DAVRON DTI-1171
The DTI-1171 custom continuous scorching system is used in the manufacturing of disc brake pads. The system utilizes a custom infrared heating fixture designed specific for the application. The hea...
DAVRON DTI-1174
The DTI-1174 dispensing hopper is used to dispense a powder onto a textile product. The feed system and the hopper together provide a system that dispenses the powder in an even manner from end to ...
DAVRON DTI-1175
The DTI-1175 custom indexing conveyor oven is used to cure disc brake pads for the automotive industry. The oven utilizes a compact design to allow maximum production in a small footprint. The sys...
DAVRON DTI-1182
The DTI-1182 vertical drying oven is used to heat a product web and remove moisture (solvents) from the product by heated evaporation. The system includes 2 LEL monitors with multiple alarm functio...
DAVRON DTI-1195
The DTI-1195 custom preheat batch oven is used in the automotive industry to preheat wiring harnesses before being moved to the production line. The oven includes 2 full opening doors located on th...
DAVRON DTI-1200
The DTI-1200 Overhead Monorail Conveyor Oven System is used to heat a polypropylene product used in the automotive industry. The overhead monorail conveyor oven described here is the oven located o...
DAVRON DTI-1202
The DTI-1202 custom preheat batch oven is used to heat a polypropylene product used in the automotive industry. The oven heats the product to simulate the extreme conditions that occur during the l...
DAVRON DTI-1213
The DTI-1213 indexing conveyor oven is a thermoforming solution that is used to preheat a composite material blank prior to press forming. The composite material blank is used in the manufacturing...
DAVRON DTI-1214
The DTI-1214 Infrared Shuttle Oven is a specialized thermoforming oven system preheats automotive textile products prior to press forming. This oven system utilizes one manual product shuttle. The...
DAVRON DTI-1217
The DTI-1217 Foam Conversion Equipment operates to complete processes required by manufacturing after the foam expansion oven process. The conversion equipment is a series of machines with each mac...
DAVRON DTI-1220
The DTI-1220 Infrared Indexing Conveyor Oven is a heated chamber with pass-through oven conveyor. The conveyor system indexes to keep pace with the production rate. The conveyor belt is a flat wire...
DAVRON DTI-1225
The DTI-1225 drop bottom batch oven is used to process titanium parts. The system utilizes a rack system that lowers into and out of the oven. When the rack is in place it becomes the floor of the ...
DAVRON DTI-1230
This curing tunnel oven is used to cure an adhesive component on filter media used in the automotive industry. The curing tunnel oven was designed to accommodate an existing conveyor system that wa...
DAVRON DTI-1237
The DTI-1237 Vertical Curing Oven provides manufacturing capability for the Medical and Pharmaceutical Industry in a vertical arrangement to save valuable manufacturing floor space. DTI-1237 includ...
DAVRON DTI-1239
The DTI-1239 inert batch oven is used to dry aluminum parts. The oven is a top load type oven and parts are placed in a basket for drying. The oven door is pneumatically actuated and opens and clos...
DAVRON DTI-1240
This contact heater system is used to preheat carpet products used in the automotive industry to make interior components. The system features 2 heated platens. The upper platen is heated by electr...
DAVRON DTI-1244
The DTI-1244 indexing conveyor oven pre heats interior components used in the automotive industry. Product can be loaded on the oven conveying system with an automated pick-and-place system or manu...