EMM TM80NC
UTE 06
WAUSEON 1202
WAUSEON 1202L
UTE 12
UTE EF-101
UTE EF-102
MANCHESTER TOOL & DIE M72-H-3
The Manchester model M72-H-3 and M72-H-4 are hydraulically operated machines with a vertical tool holder that is easily programmed to make one, two, three or four strokes. Some of the many features...
MANCHESTER TOOL & DIE M72-H-4
The Manchester model M72-H-3 and M72-H-4 are hydraulically operated machines with a vertical tool holder that is easily programmed to make one, two, three or four strokes. Some of the many features...
MANCHESTER TOOL & DIE M94-H-6-G
The Manchester model M94-H-6-G is a hydraulically operated combination tube end forming and grooving machine. The machine includes a single stationary clamp for holding the tube, as well as a trans...
MANCHESTER TOOL & DIE M96-H-1
The Manchester model M96-H-1 is a hydraulic operated one stroke machine. The machine was designed as an economical way to perform lockbead operations that require one stroke, but may be used for ma...
VAILL 206
The production rate depends on the complexity of the forming application and can attain up to 1000 parts/hr. The forming machine can be : Hand operated for low production volume Semi-automatic ...
VAILL 260
The production rate depends on the complexity of the forming application and can attain up to 1000 parts/hr. The forming machine can be: Hand operated for low production volume Semi-automatic F...
VAILL 264
The production rate depends on the complexity of the forming application and can attain up to 1000 parts/hr. The forming machine can be: Hand operated for low production volume Semi-automatic F...
WECOTECH TUBEPUNCH
Tube end punching: single or multiple slots on circumference, straight, Torca, parallel or perpendicular to the axis.
UTE 20
UTE EF-104
VAILL 360
The production rate depends on the complexity of the forming application and can attain up to 1000 parts/hr. The forming machine can be: Hand operated for low production volume Semi-automatic F...
VAILL 364
The production rate depends on the complexity of the forming application and can attain up to 1000 parts/hr. The forming machine can be: Hand operated for low production volume Semi-automatic F...
WAUSEON 1004EL
WAUSEON 1005HY
KING-MAZON KM-P25CNC
CISFUN 0360
SISTECH TS12/28 CNC
An innovation in the pipe Cutting and Shaping sector is the new machine TS12/28 CNC, which can process materials such as STAINLESS STEEL- ALUMINIUM – COPPER with unmatched performance in its catego...
ALPINE EF30-3
ALPINE EF30-6
CSM EF30-3
GFU RM 30/2/2
Machine type high-speed end-former RM 30/2/2 Dimensions ∅ 20 - 30 mm Wall thickness 1,5 - 2 mm Cycle time approx. 9 Sek. Length 350 - 2.500 mm Application double side closing of tubes for radiator ...
OMS TE1K30-1/C
CMP AUTOMATION AUTOMATED END FORMING AND BENDING SYSTEM
CMP AUTOMATION AUTOMATED END FORMING AND CNC BENDING SYSTEM
CMP AUTOMATION EFP100
WAUSEON 1103
WAUSEON 1104
GFU RM 50/2
High-speed end-former RM 50/2 + mechanical treatment Dimensions ∅ 25 - 33 mm Wall thickness 1,5 - 2,5 mm Cycle time approx. 7 Sek. Length 150 - 320 mm Application airbag pressure tank, high pressu...
LEFON SQUAREDEVIL-1.5
MANCHESTER TOOL & DIE M71-E-3
The M71-E-3 & M71-E-6 Electric Tube End Forming Machines accept tubes up to 1-1/2" in diameter. The M71-E-6 has a servo driven, six position rotary shuttle and the M71-E-3 has a pneumatically drive...
MANCHESTER TOOL & DIE M71-E-6
The M71-E-3 & M71-E-6 Electric Tube End Forming Machines accept tubes up to 1-1/2" in diameter. The M71-E-6 has a servo driven, six position rotary shuttle and the M71-E-3 has a pneumatically drive...
MANCHESTER TOOL & DIE M71-H-3
MANCHESTER TOOL & DIE M71-H-6
The Manchester model M71-H-6 is a hydraulically operated machine that uses a programmable six position rotary tool holder. The machine is easily programmed to make one through six strokes and a sim...
