AMADA AS-6510
- نظرة عامة على المنتج
The AS 6510 automated material storage and load system allows the vertical use of space, producing floor space savings and superior material management logistics. With the AS 6510, speed and productivity are mathematically predictable and no longer linked to personnel motivation. Preprogrammed commands allow the system to work around the clock with limited operator intervention. The pallet loading elevator automatically retrieves the material shelf as scheduled through the line control computer. A lifting assembly equipped with vacuum cups descends on the top sheet of the stack and lifts one sheet. The thickness of the sheet is checked to ensure that only one sheet was lifted for loading onto the punch press table.
After punching is complete, the unloader clamps proceed forward until they detect the edge of the sheet. The clamps then hold the material and retract to their original position so the material is positioned on a pallet, which is located on the scissors table. The clamps open and the material lays flat on the pallet.
After punching is complete, the unloader clamps proceed forward until they detect the edge of the sheet. The clamps then hold the material and retract to their original position so the material is positioned on a pallet, which is located on the scissors table. The clamps open and the material lays flat on the pallet.
- عن الشركة
the grinding machines, lathes, and press handled by amada wasino are all manufactured at specialty factories. grinding machines are manufactured at the komaki grinder factory with an area of 8,500 square meters, lathes at the 21,000 square meter imamura plant, and presses at the komaki press factory which has an area of 7,100 square meters. each type of machinery is produced on integrated assembly lines. at each factory, everything from components production to final assembly is subjected to thorough production control. besides this, stringent quality control standards are enforced through precision detection and measurement devices.
الموزعين و مكاتب المبيعات و خدمة وإصلاح محلات
- الموزعين40Allegheny Machine Tool Systems, Inc.
632 E. McMurray Rd.
McMurray, Pennsylvania 15317
الولايات المتحدة الامريكيةApplied Machine Solutions, Inc.
1441 Airport Dr.
Suite #300
Ball Ground, Georgia 30107
الولايات المتحدة الامريكيةMt. Penn Tool & Machine Co.
324 Second Street Pike
Unit 20
Southampton, Pennsylvania 18966
الولايات المتحدة الامريكيةChristensen Machinery & Supply Co.
1101 56th Avenue
Menominee, Michigan 49858
الولايات المتحدة الامريكيةMachine-Technos México, S.A. de C.V.
Av. Aguascalientes Norte No. 622-20
Fracc. Pulgas Pandas Norte Centro Comercial El Cilindro
Aguascalientes, Aguascalientes 20138
المكسيكDisma S.A. de C.V.
Calz. Mexico-tacuba No. 880 Col.
Torre Blanca (diagonal Legaria)
Cd. de México, Distrito Federal 11280
المكسيكDMARK Corporation
10313 Los Alamitos Blvd.
Los Alamitos, California 90720-2110
الولايات المتحدة الامريكيةFahey Machinery Company, Inc.
17605 SW 65th Avenue
Lake Oswego, Oregon 97035
الولايات المتحدة الامريكية - مكاتب المبيعات12Amada Machine Tools America, Inc.
2324 Palmer Dr.
Schaumburg, Illinois 60173
الولايات المتحدة الامريكيةAmada America, Inc. (U.S. Headquarters)
7025 Firestone Blvd.
Buena Park, California 90621
الولايات المتحدة الامريكيةAmada (India) Private Limited
C-Wing - 412 Floral Deck Plaza ,
MIDC, Opp. Seepz, Andheri (East),
Mumbai, Maharashtra 400 093
الهندAmada Malaysia Sdn. Bhd.
No. 20, Jalan Pendaftar U1/54, Temasya Industrial Park, Section U1, Glenmarie
40150 Shah Alam, Selangor Darul Ehsan
Shah Alam, Selangor
ماليزيا - خدمة وإصلاح محلات13Quality Machine Repair & Engineering
PO Box 46112
Brownsburg, Indiana 46112
الولايات المتحدة الامريكيةLapis Services Inc
1101 Cumberland Crossing Drive #272
Valparaiso, Indiana 46383
الولايات المتحدة الامريكية