CLEARING 3000 TON HYD FORGING PRESS
3000 Ton, 18" Stroke, 50" Stroke, 60" x 60" Bed, 75 HP
EUMUCO SP100C
DAYLIGHT 700 mm STROKES 85 n°/min STROKE 250 mm TABLE SIZE 1.240 x 850 mm RAM SIZE 790 x 790 mm TABLE ADJUSTMENT 17,5 mm UPPER EJECTOR STROKE 20 mm LOWER EJECTOR STROKE 25 mm ENGINE POWER 60 cv
FUJICAR PCF-630-65-70
Hot Forging Press Make : Fujicar, Japan Model : PCF-630-65-70 Year : 1980's Capacity : 630 Ton Slide stroke : 200 mm Speed : 100 SPM Die height : 490 mm Slide adjustment : 12 mm Bolster size : 650 ...
FUKUI MSF 1000
USED FUKUI 1,000 TON MECHANICAL SINGLE CRANK COLD FORGING PRESS, Stock# 11057, Year: 1991
HYDRAULIC FORGING PRESS 4200
It is an hydraulic press (water at max 220 atm from the high pressure line) with a force of 4200 tons. It was maintained (changing columns, crossbar, bench, structure in general) many times and rev...
HYUNDAI 1500-1500*1200
Push Down Acting, Free Forging Hydraulic Press with Piercing and Sliding Table.
HYUNDAI PRECISION 1500TON
LAMBERTON
DAYLIGHT 1.350 mm, TABLE SIZE 1.100x1.300 mm
MANZONI 750 TON
HOT FORGING PRESS MANZONI 750 TON
NATIONAL 1000 MAXI PRES
(1) Used 1000 Ton National Maxi Press
NATIONAL MACHINERY
4,000 Ton National forging press line
NOVOKRAMATORSK K8548
Hot forging press NKMZ ( Kramatorsk) K8548 Year: 1975 Nominal force: 6300 tons Number of continous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper positi...
SKODA CKV 6300
Manufacturer: Škoda Type: CKV 6300 Main dimensions – Distance between columns: 4 000 mm – Upper beam width: 2 900 mm – Clearance press height: 6 000 mm – Ram beam stroke: 2 500 mm – Total length: ...
SMERAL LZK 2500
SMERAL LZK 2500 Hot Forging press Year: 1978 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): ...
WARCO 100-2-90C SSDC
Press was re-built in 2018 and never ran since then. Warco press was part of a federal machine. Both were bought out by bcn technical services . 100 ton capacity 15'' total stroke 20/23 spm sdav=2...
WATERBURY FARREL 1016 ICOP
Waterbury Farrel 1016 ICOP Eyelet Transfer Press W/3" Stroke & Arc-Trol Die Protection Make: Waterbury Farrel Model: 1016 ICOP Stroke: 3" Shut Height: 2.75 To Top Of Die Shoe Capable Of Drawin...
WEINGARTEN PSS300
STROKE 480 mm, STROKES 33-45 n°/min, SCREW 300 mm, TABLE SIZE 700x800 mm, SHUT HEIGHT 670 mm, ENGINE POWER 50 kW
