Overview Water temperature control units circulate temperature stabilized water through the process for process temperature control. The temperature control range of this unit is 30°F - 250°F. A pump circulates water through the process. A heater and a cooling valve work together to control the water temperature. This temperature control unit requires a plant water supply source. Temperature control units are portable, built on casters to easily move the unit between processes. Specifications VT-275-LXG (1) Heater (2) kW : 10 Process Pump HP : 3/4 GPM : 35 PSI : 30 Full Load Amperage (3) 230/3/60 : 27.8 460/3/60 : 13.9 575/3/60 : 11.6 Connection Sizes To Process : 1-1/4" From Process : 1-1/4" Water Supply : 1/2" Drain : 1/2" Dimensions Height : 28-1/4" Width : 12-1/2" Depth : 19-1/2" Weight (5) Shipping : 200 lbs Specification Notes: 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications. 2. Derate heater output by 25% for 208/3/60 operation. 3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options. 4. Consult factory for 50HZ operation. 5. Unit weight crated for shipment. Features Process Pump 3/4 HP process pump Stainless steel shaft Horizontal motor extends bearing and seal life ODP (open drip proof) motor Pump seal flush line Custom designed impeller and casing High grade mechanical contactor with over current, phase loss and short circuit protection Cooling Vavle PVT™ Solenoid Valve Pulsed by the microprocessor controller Heater 10 kw Stainless steel sheath Built-In flange for bolt-in mounting Mechanical contactor Control Instrument Controls temperature from 30°F to 300°F Cabinetry & Frame Stainless steel panels Hinged electrical cabinet door Lift-off mechanical cover Portable, on castors System Limits Water supply pressure switch Process pump motor overload protection Process pressure relief valve High temperature limit protection Control circuit fuse Electrical DIN rail mounted electrical components UL approved components Nema 1 electrical construction Pressure Gauges To process From process Heating & Cooling Cylinders Twin cylinders - separate heating and suction tanks Made from cast iron by custom molds Reinforced bosses for process and ancillary connections NPT process connections Each cylinder is flanged mounted to the pump casing Warranties Lifetime on the pump seal 4 Years on the control instrument 2 Years on the cooling valve 2 Years on the mechanical system Options Control Instrument SPI communications cable - 20' '300°F' Instrument Upgrade Changes Model to VT-275-LXG 'LS' Control Instrument Changes Model to VT-275-LS 'LXT' Control Instrument Changes Model to VT-275-LXT Process Pump 1 HP @ 45 GPM Changes Model to VT-2100-LXG 1-1/2 HP @ 65 GPM Changes Model to VT-2150-LXG 2 HP @ 75 GPM Changes Model to VT-2200-LXG 3 HP @ 80 GPM Changes Model to VT-2300-LXG 5 HP @ 90 GPM Changes Model to VT-2500-LXG 7-1/2 HP @ 100 GPM Changes Model to VT-2750-LXG Heater 16 kW Changes Model to VT-375-LXG 24 kW Changes Model to VT-475-LXG 34 kW Changes Model to VT-575-LXG Alarms High dB Audible Alarm Visual / audible beacon Electrical Power Disconnect Switch Unit Total Non-Ferrous Unit Closed Circuit Cooling Closed Circuit Cooling With Expansion Tank Mold Purge Dual Zone dolly with water manifold and/or single electrical connection Stacking Stand with water manifold and/or single electrical connection Cabinetry & Frame Rear Panel Cover Control Instrument LXG Series Simple menu driven controller LCD display Home screen includes continuous setpoint and to process temperature % Heating or Cooling indication on home screen Standard shut down pump seal cooling feature User configurable automatic start-up venting Out-of-spec alarm including standard audible signal Selectable SPI or Modbus RTU communication Optional Modbus TCP communication Drop in replacement for older Advantage LE series control instrument For process fluid temperature up to 250°F Operates exclusive AVT modulating cooling valve Selectable °F or °C temperature display Optional : High temperature fluid capability to 300°F Optional : Flow meter with flow rate display