العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)SNK HF-6M
Niedersachsen, المانيانظرة عامة
علامة تجارية
موديل
بطاقة الهوية
611074
حالة
تستخدم - ممتاز
السنة
2017
الموقع
Niedersachsen
المانيا
المانيا
رقم المخزن
MV-6385
This Double column 5-face machining centre made by SNK Japan is in superb condition with less than 1500 run hours .
It is fitted with all the options to make 5-face machining easy and comfortable.
Tool changer and head changer with heads make machining in one setup possible.
This avoids delay, and loss of accuracy.
تحويل المواصفات للمتري
X | 364.17" |
Y | 165.35" |
Z | 39.37" |
القدرة | 49.6 hp |
RPM | 3,000 RPM |
الجدول-W | 118.11" |
الجدول-L | 314.96" |
# ATC | 60 |
انحناء | BT50 |
الأبعاد | 24900 x 9100 x 8400 |
CNC تحكم | CNC (Fanuc 31-iB) |
مجهزة
60 station tool magazine and automatic tool changer ATC.
Tool changing in Vertical & Horizontal spindles (heads).
5 station Head magazine and automatic head changer AAC.
Angle heads indexing 1° increments (standard is 4 x 90°).
Universal center swivel head indexing at 1°/1° increments in B-Plane and C-Plane. B 0-95°. C 0-359°
90° angle head L 700 mm.
90° angle head L 500 mm.
Universal center swivel head L 800 mm.
Vertical high speed head to 6000 rpm.
90° high speed angle head to 15000 rpm.
Special software for attachments (heads).
Chip conveyor.
Air blow.
X,Y,Z axes linear scale feedback for highest accuracies.
ورقة المواصفات
Double Column Machining Centre for 5-Face Machining.
SNK Multi Center HF-6M.
Year 2016, installed 2017.
Fanuc 31i CNC.
Distance between the columns 3500 mm.
Table longitudinal travel X 9250 mm.
Spindle head cross travel Y 4200mm.
Ram vertical travelZ 1000 mm.
Crossrail vertical travel W 2200 mm.
Table top to spindle nose max. 3500 mm.
Table size 8000 x 3000 mm.
Table load 40000 kg (60000 kg evenly over the full table).
Spindle drive motor 37/45 KW.
Spindle speeds 30 - 3000 rpm.
Spindle torque max. 1954 Nm.
60 station tool magazine and automatic tool changer ATC.
Tool changing in Vertical & Horizontal spindles (heads).
5 station Head magazine and automatic head changer AAC.
Angle heads indexing 1° increments (standard is 4 x 90°).
Universal center swivel head indexing at 1°/1° increments in B-Plane and C-Plane. B 0-95°. C 0-359°
90° angle head L 700 mm.
90° angle head L 500 mm.
Universal center swivel head L 800 mm.
Vertical high speed head to 6000 rpm.
90° high speed angle head to 15000 rpm.
Special software for attachments (heads).
Chip conveyor.
Air blow.
X,Y,Z axes linear scale feedback for highest accuracies.
AS NEW CONDITION WITH LESS THAN 1500 Hours !
رؤية المزيد من العقارات المعروضة من هذا النموذج
رؤية المزيد من العقارات المعروضة من هذا النوع
VISION WIDE VB3016
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)
VISION WIDE VF4000
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)
QUICKMILL INTIMIDATOR 120
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)
OKUMA MCV 21-41
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)
رؤية المزيد من العقارات المعروضة لهذه العلامة التجارية
SNK FSP-50V
مراكز التجهيز العمودي
SNK RB-6VM
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)
SNK RB3-NSM
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)
SNK PM-6
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)