5 محور أو أكثر مخارط CNCOKUMA LT10-MY
الولايات المتحدة الامريكيةنظرة عامة
علامة تجارية
موديل
بطاقة الهوية
591510
حالة
مستعملة - جيد
السنة
1999
الموقع
الولايات المتحدة الامريكية
رقم المخزن
9320
Get your hands on this used OKUMA LT10-MY 5-Axis CNC Lathe from 1999. A versatile lathe with 7-Axis, 15.7" swing, 37.8" Machining Length, 8" Chuck Size, 8.27" Turning Dia and up to 6,000 RPM. It comes equipped with an OSP U100L Control, (6) Live Holders for X and Z-Axis and LNS S-2 bar feed. Notably, both turrets have live capability, the upper turret enhanced with Y axis capability. With a high pressure coolant system and filter, it shows excellence in back working with LH spindle.
تحويل المواصفات للمتري
أكسات | 7 |
الأرجحة | 15.7" |
بالقطع طول | 37.8" |
حجم الظرف | 8" |
ماكس RPM | 6,000 RPM |
قطر الخراطة | 8.27" |
مجهزة
OSP U100L Control
(6) Live Holders for X and Z-Axis
LNS S-2 bar feed
Both turrets have live capability, the upper turret has Y axis capability. The LH spindle is set up for back working. The chip conveyor is on the left and the LNS S-2 bar feed is on the right.
There is a high pressure coolant system with filter. There is a great amount of tooling including six live holders each for the X and Z axis.
Machine was cleaned, serviced with all fluids and filters changed, the way covers were all rebuild by Metal in Motion of Beloit, WI. Any switches, buttons, ect in need of repair were replaced.
رؤية المزيد من العقارات المعروضة من هذا النوع
STAR SB-16R/20R TYPE G
5 محور أو أكثر مخارط CNC
MIYANO BNA-42DHY
5 محور أو أكثر مخارط CNC
DOOSAN PUMA MX2500LST
5 محور أو أكثر مخارط CNC
رؤية المزيد من العقارات المعروضة لهذه العلامة التجارية
OKUMA MCV 21-41
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)
OKUMA DMB
تدريبات شعاعي
OKUMA MCV-16/20
العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)