Swing Over Bed Ways.................................50" Actual Swing Over Cross Slide..............................38" Swing In Gap........................................66" Chuck Size..........................................32" 4-Jaw Spindle Nose........................................A1-11 Spindle Bore........................................6.125" Spindle Speeds......................................6 To 800 Rpm's Feeds...............................................0.0012 To .0183 IPR Feeds...............................................0.0025 To .0200 IPR Threads.............................................4 To 56 TPI Threads.............................................1 To 7 Metric Threads Whitworth...........................................6 To 84 TPI Tailstock Taper.....................................#6 Morse Tailstock Quill Diameter............................5.5" Tailstock Quill Travel..............................7" Main Motor..........................................50 HP Wire 240 Volts Floor Space.........................................R-L 350" X F-B 84" Machine Height......................................84" Weight..............................................44,000 Lbs. Steady Rest.........................................24" Roller Type Steady Rest.........................................40" Bronze Pads Two Aprons and Carriages............................Yes Taper Attachment on Both Aprons.....................Yes Rapid Traverse On Both Aprons.......................Yes Coolant Pan and Pump................................Yes Note: Machine has been cleaned, painted and cycled.