MACHINING CENTERS, GANTRY TYPE, N/C-CNC 2007 Okuma MCV-A2 CNC Bridge Mill, Machine # 8651 Width between columns: 80" X-Axis Table Travel: 157" Y-Axis Spindle Head Travel: 78" Z-Axis Spindle Quill Travel: 18" Distance from spindle to table, Min - Max: 0" - 59" Size of table, width x length: 60" x 162" Cutting feedrate: 0.04 to 393 IPM Rapid traverse rate: 787 IPM Spindle diameter: 3.94" Spindle taper: BT 50 Spindle speed range: 30 to 4,000 RPM Quill diameter: 8.27" Tool stations: 72 Main motor: 30 / 25 HP Machine height: 17 foot Floor space: 40 ft W x 18 ft L Machine weight: 86,900 lbs OSP P200M CNC Complete Set of Manuals Some Tool Holders 6 Ft will come off the height when the pendant if removed New cost today: About $ 1 Mil. Delivery: 12-18 months. The machine is under power and in GOOD TO VERY GOOD CONDITION. It was purchased to manufacture whip stock, which is an angular down hole tool that used to be used for offset drilling. Mud motors, directional drilling and MWD (Measure while drilling) made whipstock obsolete. It has been kept under power in an air-conditioned and heated building. Ten years ago, new owners purchased the facility. The machine has not been used since the new owners purchased the facility. Last year Okuma come in and powered up the machine. The batteries were dead. They were replaced, parameters reinstalled and the machine cycled.