DOALL 400-S Structural Bandsaw 10 3/4" x 16" Capacity,, up to 45 degree miter The DoALL 400S general purpose band saw is part of the StructurALL® family of horizontal metal cutting scissor saws. Swiveling 45 degrees, it's the ideal machine for the small to medium fabricator or machine shop, looking to make extremely accurate (straight or miter) cuts in smaller quantities. The 400S features a 9" (229mm) high x 16" (406mm) wide capacity of rectangles and 10-3/4" (273mm) rounds. This 400S manual machine can be equipped with a variety of options to further ease operation, such as pneumatic head-lift and Pneumatic vise attachments. 9″ X 16″ BAND SAW WITH SWIVEL HEAD TO 45 DEGREES RECIRCULATING COOLANT SYSTEM SAW GUIDES, SPRING-LOADED, SOLID CARBIDE INSERTS RAPID SAW HEAD APPROACH CONTROL BAND DOOR INTERLOCKS FINE ADJUSTMENT HEAD FEED CONTROL COMPLIMENTARY COOLANT PACKAGE POWERED BAND BRUSH REPLACEABLE STEEL WEAR PLATES ON BED DISCHARGE TRAY SHOVEL RAKE INSTRUCTION PLATE WITH SAWING RECOMMENDATIONS SAW BLADE GUARD ONE DOALL BI-METAL SAW BLADE INSTRUCTION AND PARTS MANUALS ON CD OR USB DATA STICK.

المواصفات

تحويل المواصفات للمتري

السعة المستطيلة (ارتفاع	9"
السعة المستطيلة (عرض	16"
سعة الدوران	10.75"
سعة المربع	10.75"
القدرة	2 hp
نوع (اوتوماتيكي، يدوي، نصف	Manual
عرض الريشة	1"
سمك الريشة	0.035"
طول الريشة	158"
الأبعاد	87” X 42” X 55″
الوزن	1,200 lbs

مجهزة

• Swivel head to 45 degrees. • Manual band tension. • Fine adjustment head feed control. • Recirculating coolant system. • Movable control console. • Discharge Tray. • Rapid head down approach. • Replaceable steel wear plates on bed. • Spring loaded, zero clearance, coolant through, carbide • Saw blade guards. faced saw guide inserts. • Band door interlocks. • Quick action rack and pawl vise system w/Acme Thread. • Operation and parts manuals on USB stick. • Gear driven band cleaning brushes. • Recommended band speed chart. • Infinity variable pulley band speed. • One (1) complimentary DoALL Bi Metal saw blade. • Heavy duty counter balance spring. • Complimentary DoALL Cutting Fluids package. • Flange backing band wheels. Machine Accessories A. Full Cycle attachment provides pneumatic head raise/vise operations allowing for head raise to a pre-determined height after the cut in auto mode. Pneumatic operations remain active in manual mode. 1008819 $2,335.00 B. 5 ft Medium-duty idler conveyor 16" between frames. Roller capacity 850 Ibs. 231546 $1,520.00 C. 10 ft Medium-duty idler conveyor 16" between frames. Roller capacity 850 Ibs. 231547 $2,477.00 D. Additional conveyor rollers 202786 $79.00 00 E. 24" Discharge table 1009399 $370.00 F. 18" Adjustable work stop - Requires item 1009399 224531 $758.00 G. Band mist lubricator 214936 $1,860.00 H. Work light 221545 $304.00 I. Laser line generator 1010956 $1,248.00 J. Flushing hose attachment 178639 $183.00 K. Additional USB stick of manuals 299998 $91.00 L. A Nationally Recognized Testing Laboratory (NRTL) is an independent third party laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards. NRTL $3,500.00 M. Four (4) hours installation and operator training SVC CHARGE LABOR $600.00 DoALL Cut Above 10 Year Warranty Annual Investment Warranty $840.00 0

ورقة المواصفات

GENERAL SPECIFICATIONS CAPACITY AT 90° RECTANGLE: 9″ X 16″ CAPACITY AT 90° ROUND: 10-3/4″ CAPACITY AT 45° RECTANGLE: 9″ X 10-3/4″ CAPACITY AT 45° ROUND: 10-3/4″ RECOMMENDED BAND TYPE: 1″ X 0.035″ MAXIMUM BAND LENGTH: 158″ BAND SPEED: VARIABLE, 105-275 FPM BAND TENSION: SPRING LOADED BY HAND WHEEL FEED CONTROL: INFINITELY VARIABLE, HYDRAULIC HEAD: COUNTER-BALANCED VISE: MANUAL WHEELS: 14.5″ DIAMETER, CAST IRON MATERIAL PASS LINE HEIGHT: 29-1/8″ TABLE CAPACITY: 1800 LBS FLOOR SPACE REQUIRED: 87” X 42” X 55″ WEIGHT: 1200 LBS

عن البائع

معلومات وجهة نظر الشركة

اطلب اقتباس

وأضاف لطلب قائمة

الطلب المقدم 2024-09-06