ACRA 3200 SET Precision Engine Lathe Swing 32 5/8" x 120" CC FEATURES: Series: 2800SET 3200SET 3600SET Swing Over Bed: 28-3/4 " 32-5/8" 36-5/8" Swing Over Cross Slide: 19-5/8" 23-5/8" 27-1/2" Swing in Gap: 39-3/8" 43-1/4" 47-1/4" Spindle Bore 6" Spindle Nose: A2-11 Spindle RPM: 15-1000 (12 Speeds) Made in Taiwan Main Motor: 25 HP x 4 P Voltage: 230/460V AC/3PH

المواصفات

تحويل المواصفات للمتري

الأرجحة	32.625"
المراكز	120"
ثقب عامود الدوران	6"
القدرة	25 hp
RPM	1,000 RPM
أرجحة فوق المجارى المتقاطعة	23.625"
الأبعاد	157.4"L x 63"W x 74.8"H
الوزن	14,700 lbs

مجهزة

STANDARD EQUIPMENT: Full Length Splash Guard Full Length Rear Splach Guard 20" 3-Jaw Chuck 2-Way Rapid Travel 4 Way Tool Holder\2- 12" Steady Rests Halogen Light Coolant System OPTIONAL ACCESSORIES: Steady Rest (20”) ………………………………………………………………………………….$ 3,550.00 Steady Rest (24”) SET36 Only……………………………………………………………. $ 4,500.00 Face Plate……………………………………………………………………....……………………. $ 1,150.00 Taper Attachment……………………………………………………………….………………. $ 4,000.00 Installation Taper Attachment………………………………………….…….…………. $ 750.00 Change 6” to 9” A2-15 Nose…………………………………………….….…….………. $ 20,000.00 Newall Digital Read-Out-60" DP700…………………….………….………………….$ 3,250.00 Newall Digital Read-Out-60" NMS300…………….…………….……………………$ 1,600.00 Newall Digital Read-Out-80" DP700.………………………….……………………….$ 3,950.00 Newall Digital Read-Out-80" NMS300…………………………………………………$ 1,800.00 Newall Digital Read-Out-120" DP700…………….…………………………………… $ 5,200.00 Newall Digital Read-Out-120" NMS300…….…………………………………….... $ 2,300.00 Newall Digital Read-Out-160” DP700……………………………………………………$ 6,50.00 Newall Digital Read-Out-200” DP700……….…….……………………………………$ 8,100.00 Newall Digital Read-Out-240” DP700…….…………….………………………………$ 8.600.00 Acu-Rite Digital Read-Out-60"/80"/120" 203/303..................................................................................................$ P.O.R. Fagor or Mitutoyo Digital Read-Out……………………………………………………….$ P.O.R.

ورقة المواصفات

FEATURES: Series: 2800SET 3200SET 3600SET Swing Over Bed: 28-3/4 " 32-5/8" 36-5/8" Swing Over Cross Slide: 19-5/8" 23-5/8" 27-1/2" Swing in Gap: 39-3/8" 43-1/4" 47-1/4" Spindle Bore 6" Spindle Nose: A2-11 Taper of Center M.T. No. 5 Spindle RPM: 15-1000 (12 Speeds) Carriage Cross Slide Travel 16.5" Compound Rest Travel 10" Tailstock Quill Diameter 3.75" Quill Travel 9" Taper of Quill Center M.T. No. 5 Bed Width 18.11" Length of Bed 120" Weight 14,500 LBS Made in Taiwan Main Motor: 20 HP x 4 P Voltage: 230/460V AC/3PH

عن البائع

معلومات وجهة نظر الشركة

اطلب اقتباس

وأضاف لطلب قائمة

الطلب المقدم 2024-11-07