CHIAN SENG AAT45

CHIAN SENG AAT60

CHIAN SENG AATD

CHIAN SENG AFT

Spiral Flute Reamer is welded with carbide flutes for finishing milling internal bore; it is a left spiral flutes and Morse Taper Shank.

CHIAN SENG AFTO

Helical Flute Reamer is welded with carbide flutes for finishing milling internal bore; it is a left helical flutes and Morse Taper Shank.

CHIAN SENG AHT

CHIAN SENG AHTC

CHIAN SENG AHTR

CHIAN SENG AHTU

CHIAN SENG AHTW

CHIAN SENG AHTX

CHIAN SENG AISA

Welding End Mill With Taiwan high technology and high-quality tungsten-steel blades, it ensures precise quality through a variety of rigorous manufacturing processes and welding techniques, and thr...

CHIAN SENG AISB

Roughing End Mill (Multiple Connected Flute), the flutes are made of multiple connected short flutes & carbide material to be a long flute and then welded on cutter, it can avoid the breakage durin...

CHIAN SENG AISC

Roughing End Mill is welded with carbide flutes and suitable for heaving milling with good chip release, excellent cutting ability and high metal cutting rate.

CHIAN SENG AISD

CHIAN SENG AISF

Over-Center End Mill is welded with carbide flutes and suitable for side milling and the groove milling. The flutes of front end are over-center to feeding forward and direct-milling on the parall...

CHIAN SENG AISY

Powerful Roughing End Mill (Semi-Circular Flute) is welded with carbide flutes, it is milling rapider and cutting heavier better than Roughing End Mill as well as with good chip release, excellent ...

CHIAN SENG AMTR

CHIAN SENG AMTX

CHIAN SENG AOT

CHIAN SENG ART

CHIAN SENG ATT

CHIAN SENG ATTX

CHIAN SENG AUTA

CHIAN SENG AUTB

CHIAN SENG AUTC

CHIAN SENG AUTO

CHIAN SENG AVT 60

CHIAN SENG AVT 90

CHIAN SENG AVTH

CHIAN SENG AVTV

CHIAN SENG AXJ

Welding Flat Spotting Drill is welded with carbide flutes as flat shape and suitable for positioning and chamfering. Before the formal boring, it is necessary to pre-drill a centering hole on the w...

CHIAN SENG CUSTOMIZATION

CHIAN SENG HSS

HSS Front-Tip Carbide Welding Drill is welded with carbide of the front end and suitable for deep bore machining; the shank is Morse taper handle.

CHIAN SENG W-AITY

CHIAN SENG W-ART

CHIAN SENG W-ATT

CHIAN SENG W-AVTH

CHIAN SENG W-AXJ

Carbide Spotting Drill is complete made of tungsten steel and suitable for positioning and chamfering. Before the formal boring, it is necessary to pre-drill a centering hole on the workpiece with ...

CHIAN SENG W-TUNGSTEN

Carbide End Mill Made with the material of tungsten carbide and grinding by Germany-made WALTER machines, that the material is rigid as well as having good wear-resistance to extend the processing ...