The platen size of Buhler 800B version 6 is bigger than usual. Accessories : Dosing Furnace ( You don’t needle ladle with this furnace) , Kawasaki Robot and Wollin YOM 1996 and actual went in production in 1998 TECHNICAL DATA: Locking Force (Strain Gauge Tested) kn 9200 Injection Force, Consolidation Phase (Adjustable) kn 650-265 1) Plunger Stroke mm 580 Injection Positions (Standard) mm 0, -50, -300, -350 Ejection force kn 340 Ejector stroke (adjustable) mm 175 Dimensions of fixed die platen (H X V ) mm 1410 x 1590 Dimensions of moving die platen (H X V ) mm 1410 x 1410 Space between tie bars mm 900 x 900 Tie bar diameter mm 180 Min. die height mm 330 Max. die height mm 1050 Stroke of moving platen mm 900 Free cycles per hour n/h 300 Rated installed capacity kw 55 Machine area L X W (incl. safety gates) m 9082 x 3.52 Machine height m 3.3 Machine weight, ready for production kg 40900 ca. Dimensions of the control cabinet L X W X H (IC) m 1.4 x.4x 1.65 1) AccessoryEequipment: (DATACESS) m 1.2 x .5 x 1.805 Injection force, consolidation phase (adjustable) kN 800 - 265 PRODUCTION DATE (Standard injection unit) PLUNGER DIAMETERS MM 70 80 90 100 110 120 130 140 Theoretical shoot volume(DIN 24480) cm3 1488 1944 2460 3037 3674 4373 5132 5952 Max. shot weight fro A1* kg 4.2 5.5 6.9 8.5 10.3 12.3 14.4 16.7 Max. specific casting pressure bar 1690 1293 1021 828 648 574 489 422 Max. projectted area ** at max. specific casting pressure cm2 544 711 901 1111 1419 1602 1881 2180 *The max. shot weight is calculated : Plunger stroke x plunger area x 0.75 x density Density for aluminium (A1) =2.5 g/cm3 (Multiply by 0.65 for magnesium alloys, by 2.5 for zinc alloys and by 3.2 for copper base alloys) **Max. theoretical projected area on max .specific injection pressure, without consideration of core locking and dynamic part of injection process.