Machine Specifications SS2 Motor Drive+A2:A39 Delta brand VFD-E variable frequency drive. Spindle 11 HP HSD (Italian) Electrospindle ISO-30 (ATC), Ceramic Spindle Bearings. Spindle RPM 6,000 - 24,000 RPM Controller Lagun Touch” Series CNC Controller. Machine features the Networking, Connectivity and online Troubleshooting. Runs industry standard "G-Code". Program transfer to the controller can be accomplished with USB, Ethernet. Remote Vacuum PUMP Control at the Operator Station Yes Dust Chute Diameter 4" Inches Volts 208-220 volts 3 phase Amps Dependent on the Vacuum Pump Selection. X, Y and Z Axis Travel 48" x 96" x 9.5" axis travel (4' x 8' Model) Gantry Clearance 11" Inches Machine Work Table 48.0" x 96.0" (4' x 8' Model) Rapid Travel/Cutting Speed 720 rapids,550 cutting Heavy-Duty Welded Tubular Steel Frame 3,500 lbs. - 4,500 lbs. (Depending on Model) Machine Foot Print 80" x 140" (4' x 8' Model) ` Machine Specifications SS2 49.0" x 97.0" x 8.0" (4' x 8' Model) Vacuum Table with T-slots Yes 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis. Yes Helical Rack-and-pinion drives on “X” and “Y” axes and precision-ground ball screw drive on “Z” axis. Yes Gantris driven on each end (two “helical” rack-and-pinion drives on “Y” axis). Yes Limit Switches. Solid State Expandable control system for custom applications. Yes Spindle Speed control through programming. Yes Manual overrides of Spindle Speed and feed speeds during run. Yes Centralized Lubrication System. Yes 10 HP Vacuum Pumps. Yes Vacuum monitoring gauge. Yes ISO-30 tool holders, collets and precision collet nuts. 30 amp Automatic Tool Changer with 8-position tool rack. Yes