ARNO FUCHS ABFRäSFIX
Abfräsfix is an electrical table stripping machine for enamelled wires. The wire is inserted into the rotating cutter head up to the length stop, 5 knives mill off the insulating varnish. The str...
ARNO FUCHS ABISOFIX
Electric hand stripping machine for enamelled copper wire The Abisofix consists of a motor unit with a cutter head. The cutter head is equipped with 3 hard metal knives. The knives are closed by r...
ARNO FUCHS BTM 2
With this machine, round and flat wires can be stripped from enamelled wire in the range of 0.2 to 6 mm. There is an option to convert to different brush diameters. The distances between the brushe...
ARNO FUCHS CRIMPMAXE
Electric stripping and crimping machine for processing insulated wire end ferrules as taped goods according to DIN 46228-4: 1990-09 Sleeve length 8 mm for cross-sections from 0.5 qmm - 2.5 mm² (opt...
ARNO FUCHS EPS 2001
The EPS 2001 is a modern stop machine for crimp and insulation displacement technology in cable assembly, designed for manual and semi-automatic workplaces, as well as for automatic operation. The...
ARNO FUCHS FINOFIX
Electric table stripping machine for enamelled copper wires from Ø 0.04 to 0.3 mm. The enamelled wire is inserted from above between the rotating, conical glass fiber brushes. After pulling the wir...
ARNO FUCHS FOX STAR
Handy device for stripping enamelled copper wires and braided wires. The Fuchsstar works with a 230 V DC motor and is connected directly to the 230 V network. Three rotating hard metal knives are ...
ARNO FUCHS HQ 30
For enamelled copper wires from Ø 0.15 - 4.00 mm. The distances between the brushes can be adjusted continuously with the help of a knurled screw. The HQ 35 P has drive axles with the same directi...
ARNO FUCHS UP 14
The UP 14 was designed for the use of all WDT standard dies and the use of slide-in devices and guide parts. Even with small quantities, our smallest already offers many advantages over a hand crim...