BECHE DGH-40
(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impac...
BLISS S-2750-4R-72-144
Manufacturer: BLISS Model: S-2750-4R-72-144 YOM: 1996 Forging Press of 2.750 T Revamped 2016, last operated 20 December 2022 Including 5 Ton Wellman manipulator Main Features 1 - Rated force: 2,50...
CLEARING 3000 TON HYD FORGING PRESS
3000 Ton, 18" Stroke, 50" Stroke, 60" x 60" Bed, 75 HP
EUMUCO SP100C
DAYLIGHT 700 mm STROKES 85 n°/min STROKE 250 mm TABLE SIZE 1.240 x 850 mm RAM SIZE 790 x 790 mm TABLE ADJUSTMENT 17,5 mm UPPER EJECTOR STROKE 20 mm LOWER EJECTOR STROKE 25 mm ENGINE POWER 60 cv
FUJICAR PCF-630-65-70
Hot Forging Press Make : Fujicar, Japan Model : PCF-630-65-70 Year : 1980's Capacity : 630 Ton Slide stroke : 200 mm Speed : 100 SPM Die height : 490 mm Slide adjustment : 12 mm Bolster size : 650 ...
FUKUI MSF 1000
USED FUKUI 1,000 TON MECHANICAL SINGLE CRANK COLD FORGING PRESS, Stock# 11057, Year: 1991
HBE
HJ (KOREAN MAKE)
(6500ton Open Die Forging Press) x 2units Manufacturer: HJ (Korean make) / Seonam (Korean make) Design: Eastern European Corporation Installation: 2006/2008 Press Type: Four columns push down Oil h...
HYDRAULIC FORGING PRESS 4200
It is an hydraulic press (water at max 220 atm from the high pressure line) with a force of 4200 tons. It was maintained (changing columns, crossbar, bench, structure in general) many times and rev...
LAMBERTON
DAYLIGHT 1.350 mm, TABLE SIZE 1.100x1.300 mm
MACRODYNE MPFG400/400
400/400 TON (2013) MACRODYNE MODEL #MPFG400/400 HYDRAULIC HOT FORGING PRESS
NATIONAL MACHINERY
4,000 Ton National forging press line
TOPTECH SMAC MACHINERY APA MODEL
with high ridily design in machine frame , the machine body is welded of quality steel sheet and treated by tension elimination improve stability and reliability of precision of the machine
WARCO 100-2-90C SSDC
Press was re-built in 2018 and never ran since then. Warco press was part of a federal machine. Both were bought out by bcn technical services . 100 ton capacity 15'' total stroke 20/23 spm sdav=2...
WATERBURY FARREL 1016 ICOP
Waterbury Farrel 1016 ICOP Eyelet Transfer Press W/3" Stroke & Arc-Trol Die Protection Make: Waterbury Farrel Model: 1016 ICOP Stroke: 3" Shut Height: 2.75 To Top Of Die Shoe Capable Of Drawin...
WATERBURY FARREL 1210 ICOP
• Press is in great running condition. On shop floor now making parts • Transfer slide is new and an updated design using adjustable fingers • Waterbury Twin Disc Clutch • Cup Hold Down set up inc...
WEINGARTEN PSS300
STROKE 480 mm, STROKES 33-45 n°/min, SCREW 300 mm, TABLE SIZE 700x800 mm, SHUT HEIGHT 670 mm, ENGINE POWER 50 kW
WILKINS & MITCHELL S1-1250-42-48
1250ton 2 machines are available.