CINCINNATI FORTE 60" X 7" X 24,000# SLITTING LINE (14296) Slitters & Slitting Lines

Specifications

60" x 7.00" x 24,000# Cincinnati Forte Slitting LinE
Stock # 14296

Materials:                   CRS, Alum.
Max. Coil Width:             60" 
Thickness Range:             0.010" - 0.119" 
Max. Coil Weight (Entry):    24,000# 
Max. Coil Weight (Exit):     20,000# 
Max. Shear:                  45,000 PSI 
Max. Yield:                  45,000 PSI 
Coil I.D. (Entry):           16" - 24" 
Coil I.D. (Exit):            16" / 20" & 24" 
Max. Coil O.D.:              60" 
Line Direction:              Left to Right 
Mode of Operation:           Driven 
Line Speed:                  250 / 500 FPM Approx.

Consisting of the following:

-Entry Turnstile:
  Four (4) Arms x 25,000# per Arm
  Powered Rotation 
  Slotted for C-Hooks 

-Entry Coil Car:
  Mast Type 
  Floor Mounted 
  Powered Lift and Traverse 
  Self-Contained Hydraulics 
  Machine Mounted Controls 

-Uncoiler:
  Single Mandrel Type 
  Hydraulic Expansion 
  Holddown with Powered Snubber Roll 
  Wichita Water Cooled Brake 
  AC Feedup Drive 
  Slide Base 
  Paper Winder 

-Outboard Support - A & B:
  Powered Extension / Retraction 

-Entry Unit:
  Extending Blade Peeler 
  Manual Side Guides 
  Powered Entry Pinch Rolls (incomplete) 
  PVC Applicator 
  Idler Pinch Rolls for PVC Application 
  Rotary Crop Shear 

-Stationary Slitter Base:
  20 HP AC Leeson Feedup Motor, 1750 RPM 
  Renold Gear Reducer, 41.8/1 ratio
  75 HP Baldor DC Motor, 1760 RPM, (New in 2001) 
  Powered Head Lock 

-Two (2) Slitter Heads:
  Injector Type 
  Powered Traverse 
  Powered Top Arbor Adjust 
  Powered Outboard Retraction 
  "Over the Arbor" design for slitting widths between 48 - 60" 
  Head #1 - 5" Diameter Arbors 
  Head #2 - 7" Diameter Arbors 

-Pit Section:
  Inspection Table 
  Powered Cross Over Table 

-Tension Stand: Combination Drag and Roll Type
  Strip Separator Arm 
  "Drag" Type with two (2) Cylinders 
  Two (2) 14" Diameter Tension Rolls 
  Two (2) Wichita Water Cooled Brakes 

-Recoiler:
  16" Dia. Drum
  Hydraulic Pushoff 
  Hydraulic Expansion & Gripper 
  Overarm Separator Assembly 
  150 HP Baldor AC Motor, 1150/2000 RPM 
  Two (2) Speed Transmission, 2:1 and 1:1 ratios 
  Bolt-on Risers for 20" & 24" 

-Exit Coil Car:
  Mast Type 
  Floor Mounted 
  Powered Lift and Traverse 
  Self-Contained Hydraulics 
  Narrow Coil Retainers 
  Machine Mounted Controls 

-Exit Turnstile:
  Two (2) Arms x 20,000# Per Arm 
  Powered Rotation 
  Slotted for C-Hook 
  Powered Lift / Retract 

-Two (2) Scrap Winders:
  Hydraulically Powered 
  Manual Scrap Dump 
  Level Wind 

-Electrical Controls:
  Main Operators Control Console 
  Auxiliary Operators Control Console 
  75 HP DC Drive for Slitter Head (New in 2003)
  150 HP DC Drive for Recoiler (New in 2001)

-Slitter Tooling:
  Approx. Knife Count
  80 - 0.250" x 5" ID 
  50 - 0.500" x 5" ID 
  59 - 0.250" x 7" ID (beveled) 
  47 - 0.250" x 7" ID (beveled) 
  58 - 0.250" x 7" ID 
  Rubbers 
  Spacers 
  Shims 
  Separator Tooling 

-Hydraulics System 

-Water Cooler 

-Removed and in Storage
**Temporary Specifications Subject to Revisions**
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO BUYERS VERIFICATIION**