Manufacturer: Wagner (SMS MEER) Type: SP 1ZO 1000 YOM: Revamped 2006 and 2019 REVAMP REPORT 2019 3.2. Mechanical works 3.2.1. Supplies and Achievements Supply and machining of 4 guiding columns • Material 42CD4V + CPCU 3.1, 0330 x length 6300 from raw forged, treated, dress and owned • Central threads and external thread • The centering bearings will be pre-machined to a rough dimension and finished according to diameters obtained a􀅌er retouching on the lower windchest and the upper yoke. Refurbishment of the lower bedstead: • Cast steel • Weight of 10,600 Kg and dimensions of 3500 x 3174 • 1050 Moun􀆟ng on boring machine with balancing and geometric and dimensional checks • Retouching of the 4 lines of bores with 0330/332 (Rework of a maximum of 1mm/rays) • Dressage of inferiors and superiors • Retouching of 2 sides with 0340H7 and Ø330H7 (mini) • Retouching of 4 sides with 0125H7 • Retouch in the center 0170H7; 0220; 0260H7 • Surfacing 2 side plates 360 x 240 with dimensions of 320. Office: Joop Geesinkweg 501 l 1114 AB Amsterdam l The Netherlands Phone: +31 (0) 20 261 8935 l Mob: +31 (0) 6 54 115413 Email: mkolo@krudoind.com l Website: www.krudoind.com Repair of the mobile crosspiece (slider) • Dimensions of the slider: To be defined (no plan in our possession) • Material: Cast steel • Assembly, balancing and geometric check • Resump􀆟on of the 4 lines of guide rings and the support surface • Support face of the Table with an es􀆟mated weight of 10,000 Kg Refurbishment of the upper bed base • Cast steel • Weight of 13,600KG and dimensions of 2500 x 1900 x 1900 + Moun􀆟ng on boring machine with balancing and geometric and dimensional checks In • Retouching of the 4 lines of bores with 0305/307 (Rework of a maximum of 1mm/radius A: 4 Cheek dressing Ob • Resump􀆟on of the central bore at 0760H7 and depth 510 with the bearing face at 01000/760 ) • There is Minimum retouch of the rear guide at 0460; 430 with the support face at 0900/460.

Manufacturer: Wagner (SMS MEER) Type: SP 1ZO 1000 YOM: Revamped 2006 and 2019 REVAMP REPORT 2019 3.2. Mechanical works 3.2.1. Supplies and Achievements Supply and machining of 4 guiding columns • Material 42CD4V + CPCU 3.1, 0330 x length 6300 from raw forged, treated, dress and owned • Central threads and external thread • The centering bearings will be pre-machined to a rough dimension and finished according to diameters obtained a􀅌er retouching on the lower windchest and the upper yoke. Refurbishment of the lower bedstead: • Cast steel • Weight of 10,600 Kg and dimensions of 3500 x 3174 • 1050 Moun􀆟ng on boring machine with balancing and geometric and dimensional checks • Retouching of the 4 lines of bores with 0330/332 (Rework of a maximum of 1mm/rays) • Dressage of inferiors and superiors • Retouching of 2 sides with 0340H7 and Ø330H7 (mini) • Retouching of 4 sides with 0125H7 • Retouch in the center 0170H7; 0220; 0260H7 • Surfacing 2 side plates 360 x 240 with dimensions of 320. Office: Joop Geesinkweg 501 l 1114 AB Amsterdam l The Netherlands Phone: +31 (0) 20 261 8935 l Mob: +31 (0) 6 54 115413 Email: mkolo@krudoind.com l Website: www.krudoind.com Repair of the mobile crosspiece (slider) • Dimensions of the slider: To be defined (no plan in our possession) • Material: Cast steel • Assembly, balancing and geometric check • Resump􀆟on of the 4 lines of guide rings and the support surface • Support face of the Table with an es􀆟mated weight of 10,000 Kg Refurbishment of the upper bed base • Cast steel • Weight of 13,600KG and dimensions of 2500 x 1900 x 1900 + Moun􀆟ng on boring machine with balancing and geometric and dimensional checks In • Retouching of the 4 lines of bores with 0305/307 (Rework of a maximum of 1mm/radius A: 4 Cheek dressing Ob • Resump􀆟on of the central bore at 0760H7 and depth 510 with the bearing face at 01000/760 ) • There is Minimum retouch of the rear guide at 0460; 430 with the support face at 0900/460.