CNC LathesWOHLENBERG PB4-1600
United StatesOverview
63" x 396" Wohlenberg VDF PB4-1600 CNC, 16.9" Boring Bar, 160 HP, 355 RPM G & L 8000 CNC, '91 '00, #22544
Convert Specs to Metric
Chuck Size | 55.12" |
Bar Capacity | 16.92" |
Power | 160 hp |
Max RPM | 355 RPM |
Swing | 63" |
Machining Length | 396" |
Control | CNC (Giddings & Lewis 8000 CNC Control) |
Spec Sheet
Reference #22544
Wohlenberg VDF PB4-1600 63" x 396" High Performance CNC Boring Lathe
FEATURES:
Giddings & Lewis 8000 CNC Control, Retrofitted 2000
55.12" Diameter Face Plate Chuck with Jaws
16.92" Diameter Boring Bar
Boring Heads (2)
W-Axis Positioning
X-Axis Taper
Feed Pressure Measuring Devise
Hardened & Ground Ways
Coolant System with Polo Paper Filtration
Prab Chip Conveyor System
CAPACITY:
Maximum Swing Over Bedways ............ 62.99"
Boring Diameter Solid Boring .......... 12.4"
Trepanning ............................ 2" to 25"
Counter Boring With Pilot Pre-Bore .... + 25"
Maximum Boring Depth, Z-Axis .......... 396"
Length of Bed ......................... 1,176"
Width of Bed .......................... 39.37"
Machine Weight ........................ 180,000 Lbs
WORK HEADSTOCK:
Speeds, Infinitely Variable ........... 1.8-355 RPM
Speed Ranges .......................... 4
Main Spindle Diameter Front Bearing ... 11.81"
Main Spindle Bore ..................... 6.4"
Maximum Torque, 31 rpm at 180 HP ...... 39,900 FT/Lbs
Maximum Workpiece Weight (1) Rest ..... 88,000 Lbs
Maximum Workpiece Weight (2) Rests .... 110,000 Lbs
Maximum Workpiece Weight (3) Rests .... 140,000 Lbs
Main Motor ............................ 160 HP
Electrics ............................. 460V 3-Ph 60 Cycle
Approximate Floor Space (L x W) ....... 1260" x 102"
GUIDE CARRIAGE:
Feed Range ............................ 0-120 IPM
Rapid Traverse ........................ 120 IPM
Maximum Feed Pressure ................. 22,500 Lbs
BORING SLIDE:
Feed Range ............................. 0-120 IPM
Rapid Traverse ......................... 120 IPM
Maximum Feed Pressure .................. 22,500 Lbs
EQUIPPED WITH:
55.12" Diameter Face Plate Chuck with Jaws
Giddings & Lewis 8000 CNC Control Installed 2000
16.92" Diameter Boring Bar
Boring Heads (2)
W-Axis Positioning
X-Axis Taper
Feed Pressure Measuring Devise
Hardened & Ground Ways
Coolant System with Polo Paper Filtration
Prab Chip Conveyor System
FEATURES:
Main Spindle Mounted in Precision Double Cylinder Roller Bearings
All Shafts Mounted in Anti-Friction Bearings.
Gear Mechanism Controlled via Hydraulic Gear Shifting.
Flat Way Bed Construction With 2-Vertically Arranged Helical Racks for Feed Transmission.
Guideways Hardened & Ground Approximately 500 HB.
NOTE:
Inspect In Plant
See more listings of this Type
MODERN BNC-2280XL
CNC Lathes
CINCINNATI MILACRON CINTURN 18U X 100
CNC Lathes
MITSUBISHI M-TC10B
CNC Lathes
MODERN TNC-1060 14
CNC Lathes
See more listings for this Brand
WOHLENBERG PT1 - 1070 III
CNC Lathes
WOHLENBERG B1000
Deep Hole Drills
WOHLENBERG B8S
Deep Hole Drills
WOHLENBERG VDF 1120 X 18000 CNC
Engine Lathes